Cleveland
Cleveland C58908 Spiral Flute Tap M6x1.00 3 Flutes TiCN
M6x1.00 spiral-flute tap cuts right-hand metric threads in blind holes with three flutes and TiCN coating
- TypeTaps
- M6x1.00 metric thread fits standard holes
- TiCN coating extends cutting life in steel
- Spiral flute design clears chips from blind holes
- Three flutes balance strength and chip flow
- 50 mm overall length reaches deep threads
Cleveland C58908 M6 Spiral Flute Tap
The Cleveland C58908 is a spiral flute tap designed to cut M6x1.00 metric threads in through-hole applications. It suits maintenance technicians and machinists who need reliable thread production in steel or similar materials. The right-hand cutting direction matches standard fastener requirements.
Check thread specs and tool holding before ordering
Verify that the workpiece requires a 6H class of fit and a D5 thread limit for the M6x1.00 size. The tap needs a 5.00 mm drill size for the 75 percent thread engagement specified. Ensure your tool holder accommodates the 63.50 mm overall length and that coolant or lubricant is available for the material being tapped.
High-speed steel body with TiCN coating
The high-speed steel substrate provides wear resistance for general-purpose threading tasks. A TiCN coating adds surface hardness and reduces friction during cutting. Three flutes evacuate chips efficiently in through holes while the 16.00 mm thread length defines the cutting depth per pass. The plug chamfer starts threads cleanly in existing holes.
Highlights
- M6x1.00 metric thread fits standard holes
- TiCN coating extends cutting life in steel
- Spiral flute design clears chips from blind holes
- Three flutes balance strength and chip flow
- 50 mm overall length reaches deep threads
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
Does the Cleveland C58908 tap come with a drill bit or do I need to buy a 5.00 mm bit separately?
The tap requires a 5.00 mm drill for 75 percent thread engagement; that drill bit is not included and must be purchased separately.
Should I choose the M6x1.00 D5 limit or a different class of fit for a standard 6H nut?
The D5 limit on this M6x1.00 tap is designed to produce a 6H class of fit, matching standard metric nut tolerances.
What does the 63.50 mm overall length mean when the tap is in a drill chuck?
The 63.50 mm overall length includes the 16.00 mm thread portion, leaving the shank and square to sit securely in a standard tap wrench or chuck.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
