Cleveland
Cleveland C58583 Spiral Flute Tap 3/8-24 UNF 3 Flutes Bright
Spiral flute tap cuts 3/8"-24 UNF threads in blind holes with three flutes for chip evacuation
- TypeTaps
- Spiral flutes clear chips in blind holes
- 3/8"-24 UNF thread fits standard fine-pitch fasteners
- Three-flute design balances strength and chip space
- High-speed steel resists wear in general-purpose tapping
- Bright finish suits non-ferrous and low-carbon steels
Thread-cutting tool for UNF fasteners
The Cleveland C58583 is a spiral flute tap designed to cut 3/8"-24 UNF threads in through-holes. Its right-hand thread direction and H3 thread limit produce a 2B class of fit suitable for general-purpose fastening. Machinists and maintenance technicians use it to create internal threads in steel, aluminium and other ferrous or non-ferrous metals.
Plug-chamfer start frees chip clearance
The plug chamfer requires a drilled hole to the 75 percent thread depth using an 8.50 mm drill before tapping begins. The three-flute spiral geometry lifts chips upward and out of the hole, reducing the need to reverse the tap during deep cuts. Bright high-speed steel construction means no coating to wear away, so the tool can be resharpened multiple times.
Spiral flutes sustain cutting in long engagements
With a thread length of 3/4 in and an overall length of 2 15/16 in, the flutes maintain coolant flow and chip evacuation during extended cuts. The uncoated substrate handles sustained frictional heat without the risk of coating delamination that can occur on coated taps under heavy load. Steady feed rates and proper lubrication keep thread quality consistent across repeated operations.
Highlights
- Spiral flutes clear chips in blind holes
- 3/8"-24 UNF thread fits standard fine-pitch fasteners
- Three-flute design balances strength and chip space
- High-speed steel resists wear in general-purpose tapping
- Bright finish suits non-ferrous and low-carbon steels
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
What thread limit applies to the 3/8-24 UNF spiral flute tap?
The tap is manufactured to an H3 thread limit for a 2B class of fit.
How much heat builds up when the tap runs continuously in steel?
High-speed steel construction dissipates heat during extended tapping, but cutting fluid is still recommended for prolonged use.
Which tap wrench or holder fits the shank of this 3/8-24 UNF tap?
The tap uses a standard square shank that fits common adjustable tap wrenches and T-handle holders for 3/8-inch taps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
