Cleveland
Cleveland C55685 Pipe Tap 1/2"-14 Semi-Bottoming 4 Flutes NPTF pneumatic accessory
Cuts 1/2"-14 NPTF threads in pipe and conduit with a semi-bottoming, four-flute high-speed steel tap coated in TiN
- TypeTaps
- 1/2"-14 NPTF thread cuts dry-seal pipe connections
- Semi-bottoming chamfer starts threads in blind holes
- Four-flute design clears chips for smoother tapping
- High-speed steel with TiN coating resists wear
- 75 % thread depth matches .7031 in drill size
Thread Size and Standard
This Cleveland C55685 pipe tap cuts 1/2"-14 NPTF threads for pneumatic and hydraulic connections. It is designed for mechanics and maintenance technicians who need reliable tapered pipe threads in workshop or field service applications.
Material and Coating Performance
The high-speed steel body with TiN coating resists wear during threading operations in steel and iron pipe. Right-hand cutting geometry with four flutes provides stable chip evacuation and consistent thread quality under normal hand or machine tapping conditions.
Drill Size Requirement
A 75 percent thread engagement requires a 0.7031 in drill size before tapping. This specific pilot diameter is the critical specification that determines whether the tap will produce compliant NPTF threads for the intended fitting.
Highlights
- 1/2"-14 NPTF thread cuts dry-seal pipe connections
- Semi-bottoming chamfer starts threads in blind holes
- Four-flute design clears chips for smoother tapping
- High-speed steel with TiN coating resists wear
- 75 % thread depth matches .7031 in drill size
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
How do I install the Cleveland C55685 pipe tap and what step is often missed?
Drill the hole with a .7031 inch bit for 75 percent thread engagement, then run the tap straight with steady pressure; the step most often missed is using the correct drill size before tapping.
What maintenance or replacement will the Cleveland C55685 tap need later?
The TiN coated high speed steel flutes resist wear, but the cutting edges will dull after repeated use and the tap must be replaced when threads become undersized or torn.
What limit appears first when using the Cleveland C55685 tap continuously?
Heat buildup in the 4 flute design reduces cutting efficiency first, so allow cooling between holes to maintain thread quality in NPTF applications.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
