Cleveland
Cleveland C54907 Straight Flute Hand Tap M24-3.00 pneumatic accessory
M24 × 3.00 straight-flute hand tap cuts metric threads in high-speed steel
- TypeTaps
- M24 x 3.00 metric thread cuts precise internal threads
- Straight flute design clears chips efficiently in through holes
- High-speed steel construction resists wear for longer tool life
- Bright uncoated finish suits general-purpose tapping applications
- 36 mm thread length reaches deeper holes with single pass
Cleveland M24 Hand Tap — thread cutting tool
The Cleveland C54907 is a straight flute hand tap designed to cut internal M24x3.00 metric threads. Made from high speed steel with a bright uncoated finish, it suits general purpose threading in maintenance, repair and light production work where machine tapping is not available.
Practical limits of hand tapping M24
A 75 percent thread requires a 53/64 in drill size before the tap enters the hole. The D8 thread limit and 6H class of fit define the tolerance band, so the finished thread meets standard metric specifications only when the hole is prepared to that diameter and the tap is turned with steady pressure and lubrication.
Build quality and daily use implications
High speed steel construction resists wear during repeated hand operations, while the straight flute design clears chips in through holes and blind holes with adequate chip space. The 24.62 mm overall length and 56.36 mm thread length give enough reach for typical plate and block thicknesses, and the right hand cut matches standard metric fastener direction.
Highlights
- M24 x 3.00 metric thread cuts precise internal threads
- Straight flute design clears chips efficiently in through holes
- High-speed steel construction resists wear for longer tool life
- Bright uncoated finish suits general-purpose tapping applications
- 36 mm thread length reaches deeper holes with single pass
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
Should I choose the M24-3.00 tap or a different metric size?
The Cleveland C54907 is a straight-flute hand tap for M24 x 3.00 metric threads only; select it when that exact thread size and pitch are required.
What does the 56.36 mm thread length mean when I am tapping a hole?
The 56.36 mm thread length is the cutting portion of the tap, so the workpiece must be at least that deep to produce a full thread.
How does the D8 thread limit affect the fit with a 6H nut?
D8 is the tap pitch-diameter limit; it is sized to produce an internal thread that meets the 6H class of fit when used with the recommended 53/64 in drill.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
