Cleveland
Cleveland C54797 Straight Flute Hand Tap M16-1.50 pneumatic accessory
M16×1.5 metric hand tap in high-speed steel, 96.84 mm overall length with 46.04 mm thread length for 6H class fit
- TypeTaps
- M16 x 1.50 metric thread cuts precise internal threads
- High-speed steel construction resists wear during repeated tapping
- Straight flute design clears chips efficiently in through-holes
- 84 mm overall length reaches deeper workpieces
- 04 mm thread length matches standard M16 depth requirements
Straight Flute Hand Tap M16-1.50
This Cleveland C54797 is a straight flute hand tap designed for creating internal metric threads. It suits machinists and maintenance technicians who need to cut M16 threads with a 1.50 mm pitch in through holes or blind holes where chip clearance is manageable.
Sustained cutting performance
The high speed steel construction maintains hardness during repeated threading operations. Its bright uncoated finish works adequately in low-carbon steels and non-ferrous metals where coolant can be applied. The straight flute geometry pushes chips ahead of the cut, which can load the flutes in deep blind holes during long production runs.
Thread limit D6 class 6H fit
The D6 thread limit produces a 6H class of fit, determining whether the finished thread meets the required tolerance for the mating fastener. A 75 percent thread drill size of 14.50 mm is specified for the tapping hole. This single specification decides if the tap matches the engineering drawing requirements.
Highlights
- M16 x 1.50 metric thread cuts precise internal threads
- High-speed steel construction resists wear during repeated tapping
- Straight flute design clears chips efficiently in through-holes
- 84 mm overall length reaches deeper workpieces
- 04 mm thread length matches standard M16 depth requirements
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
How much heat does the M16x1.50 tap generate during continuous pneumatic tapping?
The high-speed steel body dissipates heat through the workpiece; cutting fluid is recommended for sustained use to prevent overheating the 46.04 mm thread zone.
What pneumatic tool holder or chuck is required to drive the 96.84 mm overall length tap?
A compatible pneumatic tapping head or reversible air drill with a square-drive adapter matching the tap shank is needed; the tool is not included.
Will the D6 thread limit and 6H class of fit match threads cut by older M16x1.5 dies?
The D6 limit produces a 6H internal thread that assembles with standard 6g external threads from older dies when both follow ISO metric tolerances.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
