Cleveland
Cleveland C54753 Straight Flute Hand Tap M14x1.50 pneumatic accessory
Straight flute hand tap cuts M14×1.5 metric threads with a 12.50 mm drill size and 91.28 mm overall length
- TypeTaps
- M14 x 1.50 metric thread cuts precise internal threads
- High-speed steel construction resists wear during repeated tapping operations
- 28 mm overall length provides reach for deeper holes
- 07 mm thread length matches standard M14 tapping requirements
- Bright uncoated finish suits general-purpose hand tapping applications
Cleveland M14x1.50 Straight Flute Hand Tap
This Cleveland straight flute hand tap cuts M14x1.50 metric threads in through or blind holes. The high-speed steel construction provides wear resistance for general-purpose threading tasks. A bright uncoated finish suits manual or machine tapping operations. Right-hand threads conform to a 6H class of fit with a D6 limit.
Mechanics and maintenance teams cutting M14x1.50
The 91.28 mm overall length and 42.07 mm thread length reach standard hole depths. Bottoming chamfer design clears chips effectively in blind-hole applications. Users needing coated taps for high-volume production or exotic alloys should consider alternative tooling. The 75 percent thread drill size of 12.50 mm requires precise hole preparation.
Thread size M14x1.50 metric
This single specification determines compatibility with the intended fastener and hole. Verify the pitch matches the required 1.50 mm spacing before purchase. An incorrect thread size will produce unusable threads and damaged parts. The D6 limit and 6H fit define the tolerance envelope for the finished thread.
Highlights
- M14 x 1.50 metric thread cuts precise internal threads
- High-speed steel construction resists wear during repeated tapping operations
- 28 mm overall length provides reach for deeper holes
- 07 mm thread length matches standard M14 tapping requirements
- Bright uncoated finish suits general-purpose hand tapping applications
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
How do I install the M14x1.50 straight flute hand tap and avoid breaking it?
Use a 12.50 mm drill for the 75 percent thread, apply cutting oil, turn the tap forward one full turn then back half a turn to break chips, and keep the tap square to the hole.
What maintenance or replacement will the M14x1.50 tap need later?
Inspect the high-speed steel flutes after each use; replace the tap when threads show rounding or the D6 limit no longer produces a 6H class of fit.
What limit appears first during sustained tapping with this M14x1.50 tool?
Chip packing in the 42.07 mm thread length is the first limit; back the tap out frequently to clear swarf and prevent binding in deep holes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
