Cleveland
Cleveland C54617 Straight Flute Hand Tap M10x1.25 pneumatic accessory
Straight flute hand tap cuts M10×1.25 metric threads in 11/32 inch holes with 75 percent thread depth
- TypeTaps
- M10 x 1.25 metric thread cuts precise internal threads
- Straight flute design clears chips efficiently in through holes
- High-speed steel construction resists wear for longer tap life
- 61 mm overall length reaches deeper threaded holes
- Bright uncoated finish suits general-purpose tapping applications
Cleveland M10x1.25 Hand Tap
The Cleveland C54617 is a straight-flute hand tap cut for metric M10 threads with a 1.25 mm pitch. It is made from high-speed steel with a bright, uncoated finish and a right-hand thread direction. Machinists and maintenance technicians use it to cut new internal threads or to chase damaged ones in through-holes and blind holes.
Sustained cutting behaviour
The straight-flute design moves chips forward in the direction of the cut, which keeps the flutes clear during continuous hand or low-speed machine tapping. High-speed steel retains hardness at the temperatures generated by repeated passes, so the cutting edges stay sharp across multiple holes. The taper lead eases entry and reduces the torque spike at the start of each thread.
Thread limit D5 and 6H fit
The tap is ground to a D5 thread limit and produces a 6H class of fit, which determines the allowance and tolerance of the finished internal thread. Select this tap when the drawing or specification calls for that exact limit; a different limit will yield a thread that is too tight or too loose for the intended fastener.
Highlights
- M10 x 1.25 metric thread cuts precise internal threads
- Straight flute design clears chips efficiently in through holes
- High-speed steel construction resists wear for longer tap life
- 61 mm overall length reaches deeper threaded holes
- Bright uncoated finish suits general-purpose tapping applications
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
How much heat or noise does the C54617 tap generate during all-day use?
As a solid high-speed-steel hand tap it produces no power draw, fan noise or measurable heat; only the driving tool contributes sound and temperature.
What must I already own for the M10x1.25 tap to work?
You need an 11/32 in drill for the 75 percent thread hole and a tap wrench or powered driver that accepts the 74.61 mm overall-length shank.
Will the D5 class 6H tap cut cleanly in older mild-steel plates I keep in the shop?
The straight-flute, right-hand, uncoated geometry is designed for general-purpose tapping and will cut the 31.75 mm thread length in existing steel plates without special preparation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
