Cleveland
Cleveland C54351 Straight Flute Hand Tap #10-32 pneumatic accessory
Straight-flute hand tap cuts #10-32 UNF threads in a 7/8-inch depth with four flutes and H2 limit
- TypeTaps
- Right-hand UNF threads for standard fasteners
- #10-32 thread size fits common machine screws
- High-speed steel construction resists wear during tapping
- Four-flute design clears chips for cleaner threads
- H2 limit and 3B class ensure precise fit
Cleveland #10-32 Straight Flute Hand Tap
The Cleveland C54351 is a straight flute hand tap designed for cutting internal UNF threads in a #10-32 size. It suits maintenance technicians and hobbyists who need to create or repair fine-pitch threads by hand in metal workpieces.
Check thread standard and drill size before ordering
Verify that the application requires a Unified National Fine thread with a 3B class of fit and right-hand thread direction. The tap requires a #21 drill size for a 75 percent thread engagement, so confirm your drill bit availability and workpiece material suitability for high-speed steel cutting tools.
High-speed steel construction with bright finish
The tap is made from high-speed steel with an uncoated bright finish and features four flutes for chip evacuation during hand threading. Its overall length of 2 3/8 inches and thread length of 7/8 inch provide reach for typical through-hole or blind-hole tapping tasks, while the H2 thread limit ensures consistent fit for general-purpose use.
Highlights
- Right-hand UNF threads for standard fasteners
- #10-32 thread size fits common machine screws
- High-speed steel construction resists wear during tapping
- Four-flute design clears chips for cleaner threads
- H2 limit and 3B class ensure precise fit
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
Does the Cleveland C54351 kit include the #21 drill bit or must it be purchased separately?
The kit contains three taps sized #10-32; the 75 percent thread drill size #21 is not included and must be bought separately.
Which thread standard and class of fit does the #10-32 tap in this kit follow?
The tap follows UNF thread standard with a 3B class of fit and H2 thread limit for right-hand threads.
What does the 7/8 inch thread length mean when tapping a hole in the workshop?
It allows cutting threads up to 7/8 inch deep in a single pass with the 2 3/8 inch overall length tap.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
