Cleveland
Cleveland C54332 Straight Flute Hand Tap #10-24 pneumatic accessory
A straight-flute hand tap that cuts #10-24 UNC threads in a three-piece kit made from high-speed steel
- TypeTaps
- Right-hand thread cuts standard UNC fasteners
- Four-flute design clears chips during hand tapping
- High-speed steel resists wear on repeated use
- Bright uncoated finish suits general-purpose threading
- #10-24 size matches common machine screw threads
Cleveland C54332 Straight Flute Hand Tap #10-24
This Cleveland C54332 straight flute hand tap creates UNC #10-24 threads with right-hand direction. It is made from high speed steel with a bright uncoated finish for general-purpose threading tasks. The tool suits maintenance technicians and machinists who cut internal threads by hand.
Three-piece tap kit
The kit supplies three taps that work in sequence to produce a complete thread form. A 75 percent thread drill size #25 prepares the hole before tapping begins. Thread limit H3 and class of fit 2B define the tolerance zone for the finished thread.
High speed steel construction
Four flutes evacuate chips while the 7/8 in thread length and 2 3/8 in overall length provide reach into shallow holes. Bright finish surfaces resist galling in mild steel and aluminium without coating buildup. Not suited for automated CNC tapping cycles or left-hand thread requirements.
Highlights
- Right-hand thread cuts standard UNC fasteners
- Four-flute design clears chips during hand tapping
- High-speed steel resists wear on repeated use
- Bright uncoated finish suits general-purpose threading
- #10-24 size matches common machine screw threads
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
Will the #10-24 tap need replacement once the 4 flutes dull?
The high-speed steel tap with 4 flutes will eventually wear; replace it when threads cut poorly or the H3 limit no longer produces a 2B fit.
What stops the #10-24 tap from cutting deeper during a long run?
The 7/8 in thread length and 2 3/8 in overall length set the maximum depth; the #25 drill size and 75 percent thread engagement also limit progress.
How hot or loud does the #10-24 tap get during all-day hand use?
Bright uncoated high-speed steel runs warm under steady hand pressure but stays cool enough for continuous tapping; noise is only the cutting sound.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
