Cleveland
Cleveland C54324 Straight Flute Hand Tap #10-24 pneumatic accessory
Creates #10-24 UNC threads in metal using a four-flute high-speed steel hand tap set
- TypeTaps
- Straight-flute design cuts clean threads in #10-24 holes
- High-speed steel construction resists wear during repeated tapping
- Four flutes evacuate chips efficiently for smoother operation
- 75 % thread engagement with #25 drill ensures strong fastening
- Right-hand UNC threads fit standard coarse-thread applications
Cleveland #10-24 Tap Kit
This three-piece straight-flute hand tap kit cuts UNC #10-24 threads in through-holes and blind holes. The high-speed steel taps are uncoated and ground to a 3B class of fit with an H2 thread limit. Four flutes provide chip clearance for general-purpose threading work.
Check thread size and drill before ordering
Verify that the required thread is UNC #10-24 and that a #25 drill is available for the 75 percent thread engagement. The taps cut right-hand threads only and have an overall length of 2 3/8 inches with a 7/8-inch thread length. Ensure the workpiece material suits high-speed steel cutting tools.
Replaces worn or missing #10-24 taps
The kit restores the ability to cut #10-24 UNC threads when existing taps are dull, broken or lost. The jump is worthwhile when a precise 3B fit is specified or when a matching H2 limit is required for gauge compliance. It does not serve metric, fine-pitch or left-hand threading needs.
Highlights
- Straight-flute design cuts clean threads in #10-24 holes
- High-speed steel construction resists wear during repeated tapping
- Four flutes evacuate chips efficiently for smoother operation
- 75 % thread engagement with #25 drill ensures strong fastening
- Right-hand UNC threads fit standard coarse-thread applications
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Taps |
Questions about this item
Does the C54324 kit include the #25 drill bit for the 75 percent thread, or must I buy it separately?
The kit contains three taps only; the #25 drill bit for the 75 percent thread is not included and must be purchased separately.
How do I decide between the single tap and the three-piece C54324 kit for a #10-24 UNC thread?
The three-piece kit supplies taper, plug and bottoming taps so you can start, deepen and finish the thread in one set; a single tap only covers one stage.
What does the H2 thread limit mean when I cut a #10-24 hole in steel?
H2 allows a slightly larger pitch diameter than the basic size, giving a class 3B fit that tolerates minor hole-size variation while keeping thread engagement strong.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
