Cleveland
Cleveland C54092 Straight Flute Hand Tap #2-56 3-piece pneumatic accessory
Cuts #2-56 UNC threads in three stages with high-speed steel straight-flute taps
- Three-piece kit covers bottoming, plug and taper threading
- #2-56 UNC thread size cuts precise internal threads
- High-speed steel construction resists wear during repeated use
- Bright uncoated finish maintains sharp cutting edges
- H2 thread limit ensures class 2B fit accuracy
Cleveland #2-56 Three-Piece Tap Kit
This Cleveland C54092 kit supplies three straight-flute hand taps for cutting #2-56 UNC threads in a workshop or maintenance setting. Machinists and technicians use the set to create internal threads in metal components. The high-speed steel construction suits general-purpose tapping tasks. Each tap serves a distinct stage in the threading process.
High-Speed Steel Build With Bright Finish
The taps are made from high-speed steel with an uncoated bright finish that resists galling during hand operation. Three flutes on each tap provide chip clearance and cutting stability in through or blind holes. A 7/16 inch thread length and 1 3/4 inch overall length fit standard tap handles and wrenches. Right-hand thread direction matches common fastener conventions.
H2 Thread Limit For 2B Class Of Fit
The H2 thread limit produces a 2B class of fit for #2-56 UNC threads, which determines whether the finished thread meets the required tolerance. A 75 percent thread drill size of 1.73 mm is needed before tapping. This kit will not suit metric thread requirements or larger imperial sizes. Builders needing different pitch diameters must select another limit.
Highlights
- Three-piece kit covers bottoming, plug and taper threading
- #2-56 UNC thread size cuts precise internal threads
- High-speed steel construction resists wear during repeated use
- Bright uncoated finish maintains sharp cutting edges
- H2 thread limit ensures class 2B fit accuracy
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
What thread standard does the #2-56 tap follow, and what class of fit does it produce?
It follows UNC standard and produces a class 2B fit for right-hand threads.
What are the overall length and thread length of each tap in the set?
Each tap measures 1 3/4 inches overall with a 7/16 inch thread length.
How do you use the three taps in the correct sequence for a through hole?
Start with the taper tap, follow with the plug tap, and finish with the bottoming tap to cut full threads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
