Cleveland
Cleveland C43253 1.5 in roughing end mill
A 1.5 in roughing end mill in powdered metal HSS-E with a Weldon flat shank for heavy material removal
- 3-flute design improves chip evacuation
- Powdered metal construction resists wear in heavy cuts
- 5 in diameter removes stock fast
- 6 in length of cut reaches deep features
- Weldon flat shank locks securely in holders
Cleveland C43253 Roughing End Mill
The Cleveland C43253 is a 1.5 inch diameter roughing end mill built from powdered metal HSS-E for heavy material removal in milling operations. Its three-flute square profile and special geometry suit machine shops and maintenance teams cutting steel or exotic alloys where chip control matters.
1.5 Inch Milling Diameter
The 1.5 inch cutting diameter is the primary specification that determines whether this tool matches the required slot width or pocket size. The 6 inch length of cut and 8 1/2 inch overall length define the maximum reach and depth capability for each pass.
Weldon Flat Shank Integration
A 1 1/4 inch Weldon flat shank locks into standard end mill holders with a set screw, preventing pull-out during high-torque roughing cuts. The uncoated powdered metal substrate resists chipping in interrupted cuts and can be re-sharpened to extend service life.
Highlights
- 3-flute design improves chip evacuation
- Powdered metal construction resists wear in heavy cuts
- 5 in diameter removes stock fast
- 6 in length of cut reaches deep features
- Weldon flat shank locks securely in holders
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
What does the 1.5 in milling diameter mean when the cutter is in the spindle?
The 1.5 in milling diameter is the cutting width that engages the workpiece, so each pass removes a full 1.5 in wide chip.
How does the Weldon flat shank limit tool-holding options?
The 1 1/4 in Weldon flat shank fits only Weldon-style end-mill holders with a matching set-screw flat; it cannot be used in ER collets or shrink-fit holders.
What clearance is needed for the 8 1/2 in overall length and 6 in length of cut?
The spindle-to-workpiece distance must accommodate the 8 1/2 in overall length, with at least 6 in of usable flute length for deep cuts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
