Cleveland
Cleveland C40047 3-Flute PM+ HSS-E CrnRad CC Special Profile Roughing End Mill pneumatic accessory
A 3-flute powdered metal roughing end mill with TiCN coating and corner radius for high material removal
- 3-flute design for efficient chip evacuation
- PM+ HSS-E substrate provides high wear resistance
- TiCN coating extends tool life in abrasive materials
- Corner radius strengthens edges against chipping
- Weldon flat ensures secure toolholder grip
Cleveland C40047 Roughing End Mill
This Cleveland C40047 is a 3-flute roughing end mill made from PM+ HSS-E powdered metal with a TiCN coating and corner radius profile. It features a Weldon flat shank for secure tool holding in milling operations. The tool is designed for high material removal rates in general machining applications. It ships as a new accessory for power and pneumatic tool setups.
Machinists needing aggressive stock removal
This end mill suits machinists who need aggressive stock removal using a corner radius roughing profile in inch-based tooling systems. The 3-flute design and powdered metal substrate support heavy feed rates in steels and tough alloys. It is not for finish passes requiring tight tolerances or fine surface finishes. Buyers needing ball nose, square end, or higher flute counts for finishing should look at other tooling.
1 inch milling diameter with .12 corner radius
The single specification that decides fit is the 1 inch milling diameter combined with a .12 inch corner radius on a 4 inch flute length and 6 1/2 inch overall length. This geometry determines the cut width, corner strength, and reach for your specific roughing operation. Verify these dimensions match your tool holder capacity and workpiece requirements before purchase. The Weldon flat must match your holder type.
Highlights
- 3-flute design for efficient chip evacuation
- PM+ HSS-E substrate provides high wear resistance
- TiCN coating extends tool life in abrasive materials
- Corner radius strengthens edges against chipping
- Weldon flat ensures secure toolholder grip
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
What milling diameter does the C40047 roughing end mill use?
The Cleveland C40047 roughing end mill has a 1 in milling diameter for material removal.
What shank style does the C40047 end mill have for tool holder fitment?
It features a Weldon flat shank that locks into a matching end mill holder with a set screw.
How is the C40047 end mill installed, and what step is often missed?
Insert the shank fully, align the Weldon flat with the holder’s set screw, then tighten the screw securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
