Cleveland
Cleveland C40033 roughing end mill .75 in .06 corner radius 1.625 flute length
A 3-flute roughing end mill with a .75 in diameter, .06 in corner radius and 1.625 in flute length for heavy material removal
- Roughing power from 3-flute powdered-metal design
- TiCN coating extends tool life in steel
- 75 in diameter handles heavy stock removal
- 06 in corner radius adds strength at edges
- 625 in flute length reaches deep cavities
Cleveland C40033 Roughing End Mill
The Cleveland C40033 is a 3-flute roughing end mill made from powdered metal HSS-E with a TiCN coating. It features a 0.75 in milling diameter, a 0.06 in corner radius, and a 1.625 in flute length. This tool is designed for heavy material removal in milling operations. It uses a Weldon flat shank for secure holding in compatible tool holders.
Check Tool Holder and Machine Compatibility
Verify that your milling machine or CNC spindle accepts a Weldon flat shank before ordering. Confirm the 0.75 in cutting diameter and 1.625 in flute length suit your workpiece clearance and depth-of-cut requirements. Ensure the 0.06 in corner radius matches the profile needed for your specific roughing application. This item ships directly from the supplier.
Thermals Noise and Power Draw in Normal Use
Cutting temperatures and tool wear depend on workpiece material, coolant use, and machining parameters such as speed and feed rates. The TiCN coating helps reduce friction and heat buildup during aggressive roughing passes. Power draw is determined by the machine spindle load during the cut. Operational noise levels vary with machine rigidity and cutting conditions.
Highlights
- Roughing power from 3-flute powdered-metal design
- TiCN coating extends tool life in steel
- 75 in diameter handles heavy stock removal
- 06 in corner radius adds strength at edges
- 625 in flute length reaches deep cavities
Specifications
| Brand | CLEVELAND |
|---|
Questions about this item
What comes with the C40033 roughing end mill and what must I supply?
The box contains the 3-flute PM+ HSS-E roughing end mill with TiCN coating and Weldon flat. You must provide a compatible Weldon tool holder and cutting fluid.
How do I choose between the listed specifications for this end mill?
This is a single configuration: 0.75 in milling diameter, 0.06 in corner radius, 1.625 in flute length, and 3 7/8 in overall length. No alternative versions are offered.
What does the 0.75 in milling diameter mean when the tool is in the spindle?
It defines the maximum cutting width per pass in your material. The 0.06 in corner radius strengthens the tip for heavy roughing, while the 1.625 in flute length sets your maximum axial depth of cut.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
