Cleveland
Cleveland C33151 HSS End Mill 11/32 in D .75 in Cut L
High-speed steel end mill with a 11/32 in diameter and .75 in cut length for general milling
- TypeMilling
- HSS construction resists wear during general milling
- 11/32 in diameter suits medium-sized slots and pockets
- .75 in cut length handles shallow profiling passes
- Weldon flat shank locks securely in standard holders
- Uncoated surface works well on non-ferrous and low-carbon steels
Cleveland C33151 HSS End Mill
The Cleveland C33151 is a high-speed steel square end mill built for general-purpose milling operations. Its 11/32 inch cutting diameter and 3/4 inch length of cut suit slotting and profiling tasks in a variety of materials. The uncoated finish and Weldon flat shank provide reliable tool holding in standard tool holders. This new cutter arrives ready for immediate use in the workshop.
Machinists running manual or CNC mills
This tool suits machinists running manual or CNC mills who need a dependable uncoated cutter for ferrous and non-ferrous metals. The 3/8 inch shank fits common holders without requiring oversized collets or adapters. Shops that require extended reach or through-coolant delivery should look at different tooling, as this model has no neck relief and no internal coolant channel. It is also not suited for high-volume production where coated carbide offers longer life.
11/32 inch cutting diameter
The 11/32 inch cutting diameter is the single dimension that determines whether this end mill matches the feature size on your drawing. Verify the required slot width or profile radius against this figure before ordering. The 3/4 inch length of cut and 2-1/2 inch overall length support standard depth requirements, but the diameter is the fixed constraint that cannot be altered in the setup.
Highlights
- HSS construction resists wear during general milling
- 11/32 in diameter suits medium-sized slots and pockets
- .75 in cut length handles shallow profiling passes
- Weldon flat shank locks securely in standard holders
- Uncoated surface works well on non-ferrous and low-carbon steels
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Milling |
Questions about this item
What shank standard does the C33151 end mill use, and what collet or holder does it require?
It has a Weldon flat on a 3/8 in shank, so it fits Weldon-style holders or side-lock collets that clamp on the flat.
What clearance is needed for the .75 in length of cut and 2 1/2 in overall length?
The tool needs at least .75 in of axial reach plus the 2 1/2 in overall length inside the spindle envelope.
How is the Weldon flat oriented during installation, and what tightening step is often missed?
Align the flat with the holder's set screw, then tighten the screw firmly on the flat — not on the round shank — to prevent pull-out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
