Cleveland
Cleveland C33102 Square End Mill .15625 in
A square end mill with a 0.15625 in diameter, high-speed steel construction, TiCN coating, and a 0.4375 in length of cut
- TypeCutting Tools
- 4-flute HSS design enables efficient material removal
- TiCN coating extends tool life during milling operations
- Center-cutting geometry allows plunging cuts directly into workpiece
- Double-end configuration provides two cutting ends per tool
- Weldon flat shank ensures secure holding in tool holders
Product Identity
The Cleveland C33102 is a 4-flute high-speed steel square end mill with TiCN coating and a Weldon flat shank. It is intended for machinists and fabricators who need a centre-cutting tool for slotting and profiling in general-purpose milling operations.
Build Integration
The cutter has a 3/8 in shank diameter and an overall length of 3 1/8 in, fitting standard Weldon holders on manual or CNC knee mills. Its 0.4375 in length of cut handles shallow pockets without requiring a longer tool that would reduce rigidity in the setup.
Sustained Operation
The TiCN coating resists wear and heat buildup during extended cutting passes in ferrous materials. The four-flute geometry provides stable chip evacuation at consistent feed rates, allowing the tool to maintain dimensional accuracy over long production runs rather than only in light finishing cuts.
Highlights
- 4-flute HSS design enables efficient material removal
- TiCN coating extends tool life during milling operations
- Center-cutting geometry allows plunging cuts directly into workpiece
- Double-end configuration provides two cutting ends per tool
- Weldon flat shank ensures secure holding in tool holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
How does the 0.15625 in milling diameter limit material removal under sustained use?
The small 0.15625 in diameter restricts chip volume per pass, so feed rates must stay low to avoid tool deflection and breakage during long cuts.
What heat or noise should I expect when running this HSS end mill all day?
High-speed steel generates more heat than carbide at the same speed; use flood coolant or frequent air blasts to manage temperature and reduce squeal.
What holder or machine interface do I need for the 3/8 in Weldon flat shank?
A Weldon-compatible end mill holder with a 3/8 in bore and set-screw locking is required; standard ER collets will not clamp the flat securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
