Cleveland
Cleveland C24280 Taper Pin Reamer No 4 Bright Spiral
Spiral-flute taper pin reamer sized 3/16 inch for precise hole finishing
- TypeReamers
- Bright finish resists corrosion for longer tool life
- Helical spiral design clears chips efficiently during reaming
- Taper pin reamer sized for 3/16 in applications
- Straight shank provides stable alignment in chucks
- Cleveland brand trusted for professional power tool accessories
Cleveland C24280 Taper Pin Reamer
The Cleveland C24280 is a Number 4 taper pin reamer designed for creating precise tapered holes in metal workpieces. It suits machinists and maintenance technicians who need to fit standard taper pins for alignment or fastening tasks. The bright finish and spiral flute geometry support general-purpose use in workshop environments.
Helical Flute Performance Under Load
The helical flute design promotes continuous chip evacuation during sustained reaming operations, reducing the risk of clogging and overheating. This geometry maintains cutting efficiency over extended periods compared to straight-flute alternatives when working through deeper holes. Consistent feed pressure yields accurate hole sizing and surface finish throughout the job.
Verify Tool Holder and Workpiece Compatibility
Confirm that your machine spindle or hand tool holder accepts the reamer shank configuration before ordering. Ensure the workpiece material is suitable for high-speed steel cutting edges and that the starting hole diameter matches the reamer's small-end entry requirement. Check that adequate coolant or lubricant can be applied for the intended material.
Highlights
- Bright finish resists corrosion for longer tool life
- Helical spiral design clears chips efficiently during reaming
- Taper pin reamer sized for 3/16 in applications
- Straight shank provides stable alignment in chucks
- Cleveland brand trusted for professional power tool accessories
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Reamers |
Questions about this item
Does the Cleveland C24280 generate noticeable heat or vibration during extended reaming sessions?
The helical spiral design promotes smooth chip evacuation, which reduces friction and heat buildup during continuous operation in steel or iron.
What shank type or holder does the Cleveland C24280 require to be driven?
It features a straight shank intended for use with a standard drill chuck, collet, or tap wrench that accepts the 3/16 in diameter.
Will the Cleveland C24280 fit the same taper pin holes cut by older Number 4 reamers?
Yes, the Number 4 designation follows the standard Morse taper pin series, so it matches the geometry of legacy Number 4 tools.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
