Cleveland
Cleveland 81075 0.875 in Carbide Square End Mill
A 0.875 in diameter carbide square end mill with a 1.5 in length of cut and 4 in overall length
- TypeCutting Tools
- 875 in milling diameter for precise slotting and profiling
- 5 in length of cut enables deeper passes in a single operation
- Carbide construction with TiAlN coating resists wear at high cutting speeds
- 7/8 in straight shank fits standard tool holders without adapters
- 4 in overall length provides rigidity for stable machining
Cleveland 81075 Carbide Square End Mill
The Cleveland 81075 is a 2-flute carbide square end mill designed for general-purpose milling operations. It features a 0.875 in milling diameter with a 1.5 in length of cut and 4 in overall length. The 7/8 in shank diameter provides secure tool holding in standard tool holders.
Machinists needing a rigid carbide tool
This end mill suits machinists performing general-purpose milling in a range of materials where a square profile is required. The non-coolant-through design means it is not suited for applications requiring through-tool coolant delivery for chip evacuation or thermal management. Buyers needing coolant-through capability or different flute counts should look at alternative tooling.
Straight shank mounts directly in standard collets
Installation is straightforward as the straight 7/8 in shank mounts directly in standard collets, end mill holders, or shrink-fit holders. The TiAlN coating provides wear resistance but requires appropriate speeds and feeds to prevent premature wear. A common issue is selecting incorrect cutting parameters for the specific workpiece material, which can lead to chatter, poor surface finish, or tool breakage.
Highlights
- 875 in milling diameter for precise slotting and profiling
- 5 in length of cut enables deeper passes in a single operation
- Carbide construction with TiAlN coating resists wear at high cutting speeds
- 7/8 in straight shank fits standard tool holders without adapters
- 4 in overall length provides rigidity for stable machining
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
What size collet or holder do I need for the 7/8 in shank on this 81075 end mill?
Use a 7/8 in collet, end-mill holder or shrink-fit chuck that matches the straight shank diameter exactly.
Will the 1.5 in length of cut reach the full depth of a pocket milled with my older 1/2 in roughing cutter?
The 1.5 in flute length allows a single pass 1.5 in deep; if the older cutter left a deeper pocket you will need multiple passes or a longer tool.
How can I confirm the TiAlN coating is performing correctly after the first few cuts?
Look for a consistent gold-purple hue on the flutes, minimal built-up edge and steady chip evacuation without chatter marks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
