Cleveland
Cleveland 61071 Corner Radius End Mill .75 in .06 in 1.5 in 4 in
A 0.75 in diameter carbide corner-radius end mill with a 0.06 in radius, 1.5 in flute length and 4 in overall length
- TypeCutting Tools
- Corner radius reduces chipping with .06 in radius
- .75 in diameter suits medium milling tasks
- 5 in flute length gives deeper reach
- Carbide construction resists wear in steel
- 4 in overall length fits standard holders
Cleveland 61071 Corner Radius End Mill
The Cleveland 61071 is a two-flute carbide corner radius end mill built for general-purpose milling. It suits machinists and fabricators who need a single-end tool for profiling and finishing operations on a range of materials.
Check shank compatibility and tool clearance
Verify that your machine spindle or tool holder accepts the shank diameter implied by the 0.75 inch milling diameter. Confirm the 1.5 inch length of cut and 4 inch overall length fit within your work envelope and fixture setup before ordering.
Suited for general-purpose profiling
This tool fits shops cutting standard metals where an uncoated carbide substrate is appropriate. It is not for high-volume production lines requiring advanced coatings or specialised geometries for exotic alloys or hardened steels.
Highlights
- Corner radius reduces chipping with .06 in radius
- .75 in diameter suits medium milling tasks
- 5 in flute length gives deeper reach
- Carbide construction resists wear in steel
- 4 in overall length fits standard holders
Specifications
| Brand | CLEVELAND |
|---|---|
| Type | Cutting Tools |
Questions about this item
Does the Cleveland 61071 end mill ship alone or with extra tooling?
The single-end mill arrives as one uncoated carbide cutter; no holders, collets or additional tooling are included.
When should I pick the .06 in corner radius over another size?
Choose the .06 in radius when the print calls for that specific fillet size or when a slightly stronger corner than a sharp square end is required.
How do the 1.5 in flute length and 4 in overall length affect reach in a CNC machine?
The 1.5 in flute length sets the maximum depth of cut per pass, while the 4 in overall length determines how far the tool can reach into a pocket before the holder contacts the workpiece.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
