Cle-Line
Cle-Line C67204 Straight Tap Wrench 240 19 in
Straight tap wrench with fixed handle fits 1/4 to 1-1/8 inch fractional, 12.00 to 28.00 mm metric and 1/8 to 3/4 inch pipe taps, 19 inch overall length
- TypeAdjustable Wrenches
- Handles fractional taps from 1/4 in to 1-1/8 in for versatile threading jobs
- Accommodates metric taps from 12.00 mm to 28.00 mm for international standards
- Works with pipe taps from 1/8 to 3/4 in for plumbing applications
- Fixed straight handle provides steady control during tapping operations
- 19 in overall length gives ample leverage for larger tap sizes
Straight Tap Wrench for 1/4 to 1-1/8 in Taps
This fixed-handle straight tap wrench accepts fractional taps from 1/4 in to 1-1/8 in, metric taps from 12.00 mm to 28.00 mm, and pipe taps from 1/8 to 3/4 in. The 19 in overall length provides leverage for threading operations in maintenance, repair and light production work.
Fixed Handle Requires No Jaw Adjustment
The straight handle is non-adjustable, so there are no moving jaws to set or slip during use. Simply match the tap square to the correct wrench size; forcing an undersized tap can strip the square or damage the wrench jaws.
Verify Tap Square Fits the 240 Capacity Range
Before ordering, confirm that the taps you intend to drive fall within the stated fractional, metric and pipe tap capacities. This wrench will not accommodate taps larger than 1-1/8 in or 28.00 mm, nor pipe taps above 3/4 in.
Highlights
- Handles fractional taps from 1/4 in to 1-1/8 in for versatile threading jobs
- Accommodates metric taps from 12.00 mm to 28.00 mm for international standards
- Works with pipe taps from 1/8 to 3/4 in for plumbing applications
- Fixed straight handle provides steady control during tapping operations
- 19 in overall length gives ample leverage for larger tap sizes
Specifications
| Brand | CLE-LINE |
|---|---|
| Type | Adjustable Wrenches |
Questions about this item
How do I know the wrench is holding the tap securely after I adjust the jaws?
Tighten the adjustable jaws until they grip the tap squarely, then turn the 19 in handle; the tap should rotate the workpiece without slipping or wobbling.
What comes with the Cle-Line C67204 and what must I supply myself?
The box contains the straight tap wrench with fixed 19 in handle; you must supply taps in the 1/4 to 1-1/8 in fractional, 12.00 to 28.00 mm metric or 1/8 to 3/4 in pipe ranges.
Which tap capacity range should I choose for M12 to M28 metric threads?
Select this model because its metric capacity spans 12.00 mm to 28.00 mm, covering the full M12 through M28 range.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
