Cle-Line
Cle-Line C20735 Silver/Deming Drill 35/64 in HSS 118°
A 35/64 inch reduced-shank drill bit made of high-speed steel with a 118-degree point angle and black-oxide finish
- TypeDrill Bits
- High-speed steel construction resists wear during heavy drilling
- 35/64 inch diameter suits large-hole applications
- 118-degree point angle centres quickly in metal
- Black oxide finish reduces friction and adds corrosion resistance
Silver/Deming Drill Bit 35/64 in
The Cle-Line C20735 is a reduced-shank drill bit made from high-speed steel with a black oxide finish. It is designed for machinists and fabricators who need a larger hole diameter on a standard 1/2 in chuck. The 118-degree point angle provides a conventional cutting profile for general-purpose drilling in steel and other ferrous metals.
Capacity and headroom for 35/64 in holes
The 35/64 in diameter suits applications requiring this specific fractional size in maintenance, repair and light production work. High-speed steel offers good wear resistance in mild to medium carbon steels but loses hardness quickly in high-heat scenarios such as stainless steel or high-alloy materials. The reduced shank limits torque transmission compared to a full-diameter shank, so heavy feed rates in tough metals will cause the bit to stall or overheat.
35/64 in HSS Drill Bit Specifications
This bit is manufactured from machining-grade high-speed steel with a black oxide finish for corrosion resistance and lubricity. The 118-degree point angle is a standard geometry for general-purpose drilling in ferrous metals. It fits a standard 1/2 in drill chuck via its reduced shank, making it compatible with common handheld and bench-top drill presses without requiring a larger capacity chuck.
Highlights
- High-speed steel construction resists wear during heavy drilling
- 35/64 inch diameter suits large-hole applications
- 118-degree point angle centres quickly in metal
- Black oxide finish reduces friction and adds corrosion resistance
Specifications
| Brand | CLE-LINE |
|---|---|
| Type | Drill Bits |
Questions about this item
Will the 35/64 in reduced shank fit the 1/2 in chuck on my older drill press?
Yes, the reduced shank is sized for standard 1/2 in chucks so the 35/64 in bit mounts securely on older drill presses.
How can I confirm the 118 degree point angle is cutting correctly after setup?
A clean, centred hole with minimal wander and consistent chip formation shows the 118 degree point is engaging properly in steel.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
