Cle-Line
Cle-Line C18652 13/32 in 135 Degree Jobber Drill Bit
A 13/32 inch high-speed steel jobber drill bit with a 135-degree split point and TiN coating for general-purpose drilling
- TypeDrill Bits
- MaterialHAWA
- 135-degree split point reduces walking and starts holes cleanly
- 13/32 inch fractional size matches common automotive and machine fasteners
- High-speed steel with TiN coating resists wear and extends cutting life
- Parabolic flute design clears chips efficiently in deep drilling
- Decimal equivalent 0.4063 inch simplifies precision setup and tool selection
13/32 inch jobber drill bit
The Cle-Line C18652 is a jobber length drill bit sized at 13/32 inch with a 135 degree split point. It is made from high speed steel with a TiN coating for general purpose drilling. This fractional inch bit suits maintenance, fabrication and automotive repair tasks.
Parabolic flute clears chips efficiently
The heavy duty parabolic flute design pulls swarf from the hole during normal drilling. This reduces heat build up and cutting friction without coolant feed. The split point starts on contact to minimise wandering on steel and alloy surfaces.
TiN coating extends cutting life
The titanium nitride surface treatment increases surface hardness and reduces galling in repetitive use. No coolant holes are present so external lubrication is required for deep holes. The bit fits standard three jaw chucks and quick change adapters.
Highlights
- 135-degree split point reduces walking and starts holes cleanly
- 13/32 inch fractional size matches common automotive and machine fasteners
- High-speed steel with TiN coating resists wear and extends cutting life
- Parabolic flute design clears chips efficiently in deep drilling
- Decimal equivalent 0.4063 inch simplifies precision setup and tool selection
Specifications
| Brand | CLE-LINE |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
How do I install the 13/32 in jobber bit and what step is often missed?
Chuck the 13/32 in shank securely in a 1/2 in or larger drill chuck, ensure the split point seats squarely before applying pressure; the step often missed is confirming the bit runs true at low speed before full feed.
What maintenance or replacement will the TiN coated HSS bit need later?
The TiN coating on the high speed steel flute wears gradually; when the gold colour fades and the split point dulls, resharpen the 135 degree angle or replace the bit to maintain 0.4063 in hole accuracy.
What limit appears first during sustained drilling with this 135 degree split point bit?
Heat buildup in the non coolant through flute is the first limit; without internal coolant holes the 13/32 in bit relies on external lubrication and peck cycles to prevent temper loss in the HSS body.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
