We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Cisco jumper power cord with C14 and C15 connectors

Cisco Systems, Inc.

Cisco Systems, Inc. CAB-C15-CBN= Jumper Power Cord 250 V AC 13 A C14-C15

SKU CH-7YNP-YA7QE MPN CAB-C15-CBN=

Jumper power cord rated 250 V AC 13 A with IEC 60320 C14 and C15 connectors for Cisco 9100 Series Fabric Switches

  • TypeJumper Power Cord
  • ColorBlack
  • SpecificationsPlug/Connector Type: IEC 60320 C14, IEC 60320 C15 Voltage Ra
  • FeaturesCompatibility: Cisco 9100 Series Fabric Switches
  • Rated 250 V AC 13 A for high-power rack equipment
  • IEC 60320 C14 to C15 connectors suit hot-plug Cisco 9100 Series switches
  • 50 Hz operation matches standard data-centre supply
  • Black jacket identifies cord in dense cable runs
  • Jumper length keeps cabinet-to-PDU links short and tidy

Jumper power cord for Cisco 9100 Series

This black jumper power cord connects Cisco 9100 Series Fabric Switches to a power distribution unit. It carries a 250 V AC rating at 13 A and operates at 50 Hz. The cable uses IEC 60320 C14 and C15 connectors for a secure rack-mount link.

Ideal for Cisco 9100 rack installations

Network engineers fitting Cisco 9100 Series switches into standard cabinets will find the correct connector pairing here. Buyers who need a different connector combination or a higher amperage lead should look at other cable types.

IEC 60320 C14 to C15 connector pair

The cord terminates in a C14 plug on the supply side and a C15 coupler on the equipment side. This specific pairing matches the inlet found on the target switches. Verify that your power source and device inlets match these two connector types before ordering.

Highlights

  • Rated 250 V AC 13 A for high-power rack equipment
  • IEC 60320 C14 to C15 connectors suit hot-plug Cisco 9100 Series switches
  • 50 Hz operation matches standard data-centre supply
  • Black jacket identifies cord in dense cable runs
  • Jumper length keeps cabinet-to-PDU links short and tidy

Specifications

BrandCISCO
ModelCAB-C15-CBN=
TypeJumper Power Cord
ColorBlack
SpecificationsPlug/Connector Type: IEC 60320 C14, IEC 60320 C15
Voltage Rating: 250 V AC
Frequency: 50 Hz
FeaturesCompatibility: Cisco 9100 Series Fabric Switches
Shipping weight0.18 kg
Package size240 × 97 × 72 mm

Questions about this item

How do I connect the C14 and C15 ends to my Cisco 9100 Series Fabric Switch?

Plug the C14 connector into the switch PDU or power strip outlet and the C15 connector into the switch power supply inlet, ensuring both IEC 60320 connections seat fully.

Will the cord jacket or connectors degrade and need replacement after extended rack use?

The black PVC jacket and IEC 60320 C14/C15 connectors are rated for continuous 250 V AC 13 A service and do not have a scheduled replacement interval.

At what load does the cord reach its thermal limit during sustained operation?

The 13 A rating at 250 V AC defines the maximum continuous current; exceeding it will cause the conductor and connectors to hit their thermal limit first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.