We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black power cord with NEMA 5-15P plug and IEC C13 connector

Cisco Systems, Inc.

Cisco Systems, Inc. CAB-9K12A-NA= power cord 125 V AC 13 A NEMA 5-15P

SKU CH-J5CM-CTGBE MPN CAB-9K12A-NA=

Supplies 125 V AC power at 13 A via a NEMA 5-15 plug for the Cisco MDS 9216i switch

  • TypeCable
  • SpecificationsVoltage Rating: 125 V AC Plug/Connector Type: 1 x NEMA 5-15P
  • FeaturesCompatibility: Cisco MDS 9216i Multilayer Fabric Switch
  • Delivers reliable 125 V AC power to Cisco MDS 9216i switches
  • NEMA 5-15P plug fits standard North American 125 V outlets
  • Rated for 13 A continuous current to support switch operation
  • Built to Cisco specifications for exact compatibility with MDS 9216i
  • Supplied new as a genuine Cisco spare part for immediate deployment

Power cord for Cisco MDS 9216i

This new Cisco power cord carries the CAB-9K12A-NA= part number and is rated for 125 V AC at 60 Hz. It terminates in a single NEMA 5-15P plug for standard North American outlets. The assembly is specified for a 13 A current draw and is built as a spare accessory for compatible Cisco hardware.

Suitable for MDS 9216i switch deployments

Network engineers maintaining a Cisco MDS 9216i Multilayer Fabric Switch can use this cable as a direct replacement or spare unit. It is not intended for equipment that requires a different voltage rating, plug geometry or current capacity beyond the stated 13 A figure. Buyers needing IEC-style connectors or higher amperage feeds should look at other cable types.

NEMA 5-15P plug at 13 amps

The defining specification is the NEMA 5-15P plug rated for 13 A at 125 V AC. This combination determines whether the cord matches the facility receptacle and the switch power supply input. Verify that the target device accepts this exact plug type and current rating before ordering.

Highlights

  • Delivers reliable 125 V AC power to Cisco MDS 9216i switches
  • NEMA 5-15P plug fits standard North American 125 V outlets
  • Rated for 13 A continuous current to support switch operation
  • Built to Cisco specifications for exact compatibility with MDS 9216i
  • Supplied new as a genuine Cisco spare part for immediate deployment

Specifications

BrandCISCO
ModelCAB-9K12A-NA=
TypeCable
SpecificationsVoltage Rating: 125 V AC
Plug/Connector Type: 1 x NEMA 5-15P
Frequency: 60 Hz
FeaturesCompatibility: Cisco MDS 9216i Multilayer Fabric Switch
Shipping weight0.32 kg
Package size208 × 64 × 56 mm

Questions about this item

Will the 125 V AC 13 A rating work with the power supply already in my Cisco MDS 9216i switch?

The cord is rated for 125 V AC at 13 A, matching the input specification of the MDS 9216i power supply, so it will carry the required current without issue.

How can I confirm the cord is seated correctly after plugging it into the switch and the wall outlet?

Push the NEMA 5-15P plug fully into the receptacle until it clicks, then verify the switch powers on and shows normal front-panel LEDs.

Does the package include only the power cord or are mounting brackets or adapters also supplied?

The box contains the Cisco CAB-9K12A-NA= power cord with a NEMA 5-15P plug; no brackets, adapters or additional cables are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.