SonicWall
SonicWall 01-SSC-1445 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$378.99
0.00455862BTC
In stock
Cisco Systems, Inc.
Cisco Systems, Inc. C1300X-24MU-4X 24-port 2.5G PoE Layer 3 network switch
A 24-port 2.5G managed Layer 3 switch with 740W PoE budget and four 10G uplinks
- FormatRackmount
- StandardsIEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Et
- Network Management TypeManaged
- Primary Port TypeTotal system ports: 24 x 2.5G mGig + 4x10G RJ-45 ports: 24 x
- Management Interfaceweb user interface: Built-in switch configuration utility fo
- MAC Address Tableup to 32,000 rules
- 24 ports at 2.5 Gbps deliver faster wired throughput for dense endpoints
- Four 10 Gbps SFP28 uplinks provide high-capacity aggregation to core switches
- 740 W PoE budget powers 24 devices such as APs and cameras without extra injectors
- Stack up to 8 units for 400 ports managed as a single logical switch
- Layer 3 routing with 7168 IPv4 routes enables wire-speed inter-VLAN traffic
24-port 2.5G PoE Layer 3 switch for enterprise edge
The Cisco C1300X-24MU-4X delivers 24 multi-gigabit RJ-45 ports at 2.5G and four SFP28 uplinks at 10G or 25G for stacking. It provides a 740W PoE budget across all 24 ports to power access points, cameras and phones. The rack-mount chassis supports Layer 3 routing with up to 7168 IPv4 routes and 256 IP interfaces. Managed operation includes a web UI, CLI and Plug and Play provisioning for branch deployments.
Uplink and stacking constraints
Four SFP28 ports serve as 10G uplinks or 25G stacking links, but 25G is available only for stacking. Stacking supports up to eight switches and 400 ports managed as a single logical unit with hardware failover. Cross-stacking between different product families is not supported. The 3 MB packet buffer and 9000-byte jumbo frame limit apply to all traffic. Flow control follows IEEE 802.3x.
740W PoE budget across 24 ports
The 740W power budget is the single figure that determines how many PoE+, PoE++ or high-draw devices can run simultaneously. Each of the 24 ports can negotiate up to the standard maximum, but the total draw must stay within 740W. Exceeding this budget will cause ports to power down according to priority. Buyers needing more PoE capacity per port or a larger aggregate budget must select a different platform.
Highlights
- 24 ports at 2.5 Gbps deliver faster wired throughput for dense endpoints
- Four 10 Gbps SFP28 uplinks provide high-capacity aggregation to core switches
- 740 W PoE budget powers 24 devices such as APs and cameras without extra injectors
- Stack up to 8 units for 400 ports managed as a single logical switch
- Layer 3 routing with 7168 IPv4 routes enables wire-speed inter-VLAN traffic
Specifications
| Brand | Cisco Systems, Inc. |
|---|---|
| Series | C1300X Series |
| Model | C1300X-24MU-4X |
| Part Number | C1300X-24MU-4X |
| Format | Rackmount |
| Standards | IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbps Ethernet over fiber for LAN, IEEE 802.3an 10GBASE-T 10 Gbps Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet |
| Network Management Type | Managed |
| Primary Port Type | Total system ports: 24 x 2.5G mGig + 4x10G RJ-45 ports: 24 x 2.5G mGig Combo ports (RJ-45 + Small Form-Factor Pluggable [SFP]): 4 x SFP28 (10G Uplink, 25G available for stacking only) |
| Management Interface | web user interface: Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search. |
| MAC Address Table | up to 32,000 rules |
| Jumbo Frames | Frame sizes up to 9000 bytes. The default MTU is 2000 bytes |
| Buffer Memory | Packet buffer: 3 MB Capacity in Millions of Packets Per Second (mpps) (64-byte packets): 148.80 |
| PoE | Yes |
| Stackable | Supports up to 8 switches in a stack. Up to 400 ports managed as a single system with hardware failover. PIDs from the same Family can be stacked together. Cross-stacking between Families is not supported. |
| QoS | Priority levels: 8 hardware queues Scheduling: Strict priority and Weighted Round-Robin (WRR) Class of Service: Port-based, 802.1p VLAN priority-based, IPv4/IPv6 IP precedence/Type of Service (ToS)/DSCP-based, Differentiated Services (DiffServ), classification and remarking ACLs, trusted QoS Queue assignment based on DSCP and Class of Service (802.1p/CoS) Rate limiting: Ingress policer; egress shaping and rate control per VLAN, per port, and flow based; dualrate 3-color (2R3C) policing Congestion avoidance: A TCP congestion avoidance algorithm is required to minimize and prevent glob |
| Layer | 3 |
| Layer 2 Features | Spanning Tree Protocol: Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 16 instances are supported. Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation: Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN: Support for up to 4094 VLANs (4078 – 4094 are for internal usage) |
| Layer 3 Features | IPv4 routing: Wire-speed routing of IPv4 packets. Up to 7168 (Dynamic + Static) IPv4 routes and up to 256 IP interfaces IPv6 routing: Wire-speed routing of IPv6 packets Layer 3 interface: Configuration of a Layer 3 interface on a physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR): Support for CIDR Routing Information Protocol (RIP) v2: Support for RIP v2 for dynamic routing Policy-Based Routing (PBR): Flexible routing control to direct packets to a different next hop based on an IPv4 or IPv6 Access Control List (ACL) Open Shortest Path Firs |
| PoE Ports | 24 x PoE |
| PoE Power Budget | 740W |
| Power | 100-240V 50-60 Hz, internal, universal |
| Max Power Consumption | System power consumption 110V=92W 220V=86.2W Power consumption (with PoE) 110V=870.4W 220V=866.5W |
| Dimensions | 444.3 x 270 x 43.94 mm (17.49 x 10.63 x 1.73 in ) |
| Weight | 4.28kg (9.44lb) |
| Certification | UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A |
| Shipping weight | 6.85 kg |
| Package size | 541 × 401 × 117 mm |
Questions about this item
Should I choose the 2.5G mGig ports or the SFP28 uplinks for my core connections?
The 24 RJ-45 ports run at 2.5G mGig for endpoints, while the 4 SFP28 slots provide 10G uplinks and 25G stacking links; use SFP28 for backbone or stack links.
What does the 148.80 mpps forwarding rate mean for daily traffic?
At 64-byte packets the switch can forward 148.80 million packets per second, giving wire-speed Layer 3 routing across all 24 2.5G ports and 4 10G uplinks.
How does the SFP28 interface limit uplink speed in practice?
Each SFP28 port caps at 10G for uplinks and 25G only when used for stacking up to 8 switches in a single 400-port stack.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SonicWall
SonicWall 01-SSC-1435 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$357.99
0.00430602BTC
In stock
