Chopmate
Chopmate 85W MacBook Pro 13/15-Inch Charger 2012-2017
85W MagSafe 2 charger compatible with 13-inch and 15-inch MacBook Pro models from 2012 to 2017, featuring LED charge-status indicator and UL, CE, FCC, RoHS safety certifications
- TypeCharger
- 85W output powers 13‑inch and 15‑inch MacBook Pro models from 2012 to 2017
- MagSafe 2 connector with LED shows amber while charging and green when full
- AC 100‑240V input works worldwide on 50‑60Hz mains
- Durable cable rated for 100000 connection cycles resists wear
- UL CE FCC RoHS certified protection against short‑circuit overload and overcurrent
85W MagSafe 2 charger for 2012-2017 MacBook Pro
This 85 watt MagSafe 2 power adapter replaces the original Apple charger for 13 inch and 15 inch MacBook Pro models released between 2012 and 2017. It accepts AC input from 100 to 240 volts at 50 to 60 hertz and delivers 20 volts at 4.25 amps. The magnetic DC connector guides itself into the port for a secure connection.
LED charge indicator and safety protections
An LED at the tip of the DC connector shows amber while the battery is charging and green once it reaches full capacity. The adapter includes short-circuit, overload and overcurrent protection circuits. It carries UL, CE, FCC and RoHS certifications for electrical safety and environmental compliance.
Durable cable rated for 100000 insertions
The supplier states the cable and connector are built to withstand 100000 connection cycles without wear or loss of grip. This charger is not suitable for MacBook models that use USB-C power delivery or the older T-style MagSafe 1 connector. It also does not match the 65 watt specification listed for some smaller MacBook Air units.
Highlights
- 85W output powers 13‑inch and 15‑inch MacBook Pro models from 2012 to 2017
- MagSafe 2 connector with LED shows amber while charging and green when full
- AC 100‑240V input works worldwide on 50‑60Hz mains
- Durable cable rated for 100000 connection cycles resists wear
- UL CE FCC RoHS certified protection against short‑circuit overload and overcurrent
Specifications
| Type | Charger |
|---|
Questions about this item
How do I install the Chopmate 85W charger and what step do people often miss?
Plug the AC cord into a 100-240V 50-60Hz outlet, then attach the MagSafe connector; the LED will glow yellow while charging and green when full, confirming the magnetic alignment is correct.
What maintenance or replacement will this charger need later?
The cable and connector are rated for 100 000 connection cycles; no routine maintenance is required, but the unit should be replaced if the cord frays or the LED stops indicating charge status.
What limit appears first under sustained use?
Continuous operation at the 20V 4.25A output is protected by short-circuit, overload and overcurrent safeguards certified to UL, CE, FCC and RoHS standards, which will interrupt power before components overheat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



