Chicago Pneumatic
Chicago Pneumatic CP9779 3/8" x 13" Air Belt Sander 22000 rpm
Air-powered belt sander with a 3/8 in by 13 in belt runs at 22000 rpm and 0.35 hp for light-duty sanding
- TypeAngle, Pitch & Slope Locators
- High-speed material removal at 22000 rpm
- Precise finishing with variable speed control
- Compact 3/8" belt reaches tight spaces
- Light-duty 0.35 hp motor suits detail work
- Low 2.5 vibration level reduces fatigue
Chicago Pneumatic CP9779 Air Belt Sander
This Chicago Pneumatic CP9779 is an air-powered belt sander built for light-duty sanding tasks. It runs at 22000 rpm with a 0.35 hp motor and a fixed straight-grip arm. The 3/8 in by 13 in belt moves at 2,000 SFPM for material removal in tight areas.
Check air supply and hose before use
Verify your compressor can deliver 59 cfm at 90 psi through a 3/8 in minimum hose to the 1/4 in NPT inlet. The non-locking lever throttle requires continuous hand pressure during operation. No vacuum port is fitted, so dust extraction must be handled separately.
Thermals noise and power in normal use
The tool produces a sound level of 102 dBA and a vibration level of 2.5 vpm under load. Air consumption stays at 59 cfm while the 0.35 hp motor runs at the required 90 psi. Expect consistent output as long as supply pressure and volume remain steady.
Highlights
- High-speed material removal at 22000 rpm
- Precise finishing with variable speed control
- Compact 3/8" belt reaches tight spaces
- Light-duty 0.35 hp motor suits detail work
- Low 2.5 vibration level reduces fatigue
Specifications
| Brand | Chicago Pneumatic |
|---|---|
| Type | Angle, Pitch & Slope Locators |
Questions about this item
Does the CP9779 come with a belt installed or do I need to buy a 3/8" x 13" belt separately?
The sander is sold as the tool only; a 3/8" wide by 13" long belt must be purchased separately to match the fixed arm.
How do I choose between the CP9779 and CP9780 models?
The CP9779 is the 3/8" x 13" belt sander running at 22,000 rpm; the CP9780 is a different model in the same series with its own belt size and specifications.
What does the 22,000 rpm figure mean for material removal on the job?
At 22,000 rpm the belt runs at 2,000 SFPM, delivering 0.35 hp for light-duty sanding at 90 psi with 59 cfm air consumption.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
