Chicago Pneumatic
Chicago Pneumatic CP9113G Straight Die Grinder 1 hp 25000 RPM 3.6 kg
A heavy-duty straight die grinder delivering 1 hp and 25,000 RPM with a safety lever for controlled operation
- TypeGrinders
- Weight3.6
- MaterialHAWA
- 1 hp motor drives 25,000 RPM for fast material removal
- Heavy-duty die grinder handles demanding workshop tasks
- Straight orientation and 1/4 in collet suit precision grinding
- 3/8 in NPT female air inlet connects to standard shop lines
- Safety lever and top switch add operator control
Chicago Pneumatic CP9113G Straight Die Grinder
The Chicago Pneumatic CP9113G is a straight die grinder built for heavy-duty material removal. It runs on compressed air and delivers one horsepower at a maximum speed of 25,000 RPM. The tool weighs 3.6 kg and features a 1/4 inch collet for standard accessories. A 3/8 inch NPT female air inlet connects the unit to a shop supply line.
Professional metalworkers and fabricators
This grinder suits technicians who need sustained high-speed cutting, deburring or polishing in a fixed orientation. The straight body and top-mounted switch favour two-handed control on bench work. Buyers who require a right-angle head for tight internal corners or a cordless electric motor for mobility should look at alternative tool styles. The bare-tool kit includes only wrenches for collet changes.
Continuous air-powered operation
Under sustained load the motor maintains torque as long as the air supply meets flow and pressure demands. There is no battery to drain or electric motor to overheat during extended sessions. The safety lever prevents accidental start-up when the tool is set down between passes. Regular lubrication through the air line keeps internal components running cool during prolonged use.
Highlights
- 1 hp motor drives 25,000 RPM for fast material removal
- Heavy-duty die grinder handles demanding workshop tasks
- Straight orientation and 1/4 in collet suit precision grinding
- 3/8 in NPT female air inlet connects to standard shop lines
- Safety lever and top switch add operator control
Specifications
| Type | Grinders |
|---|---|
| Weight | 3.6 |
| Brand | Chicago Pneumatic |
| Material | HAWA |
Questions about this item
What air supply do I need to run this 1 hp die grinder?
It requires a compressed-air source with a 3/8 in NPT female inlet and enough flow for 1 hp at 25000 RPM.
Will it fit my existing 1/4 in collet accessories?
Yes, the collet size is 1/4 in, so standard 1/4 in shank bits and burrs will mount directly.
How do I confirm the grinder is running at full speed after hooking it up?
With air connected, the tool should reach 25000 RPM; listen for steady high-pitched operation and check that the safety lever moves freely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
