Chicago Pneumatic
Chicago Pneumatic CP7202D 3" Air Disc Sander Kit 15000 rpm power
Three-inch air disc sander kit runs at 15000 rpm with 0.2 hp for light-duty polishing
- TypePolishers
- Weight4.3
- MaterialHAWA
- 15,000 rpm fixed speed delivers rapid material removal
- 2 hp motor provides consistent power for finishing tasks
- Hook-and-loop abrasive mount enables quick disc changes
- 21 cfm air consumption at 90 psi matches common shop compressors
- 3 kg weight balances control with reduced operator fatigue
What this sander is and who it suits
The Chicago Pneumatic CP7202D is a 3-inch air-powered disc sander kit built for light-duty polishing tasks. Its fixed-speed motor runs at 15000 rpm and delivers 0.2 hp, making it a practical choice for detail work on small panels or tight contours. The pistol grip and hook-and-loop pad keep disc changes quick and the tool balanced in hand.
Air supply limits that shape daily use
The tool demands 21 cfm at 90 psi through a 1/4-inch NPT inlet and needs a minimum 3/8-inch hose to maintain flow. If the compressor or line cannot sustain that volume the sander will lose speed and cut quality will drop. There is no vacuum port, so dust extraction must be handled separately or accepted as airborne debris.
The single spec that decides fit
The spindle uses a 1/4-20 thread and the pad is locked to a 3-inch diameter, so only discs of that exact size and mount pattern will work. Buyers who need larger pads, variable speed or integrated dust collection should look elsewhere.
Highlights
- 15,000 rpm fixed speed delivers rapid material removal
- 2 hp motor provides consistent power for finishing tasks
- Hook-and-loop abrasive mount enables quick disc changes
- 21 cfm air consumption at 90 psi matches common shop compressors
- 3 kg weight balances control with reduced operator fatigue
Specifications
| Type | Polishers |
|---|---|
| Weight | 4.3 |
| Brand | CHICAGO PNEUMATIC |
| Material | HAWA |
Questions about this item
Should I choose a different pad size or speed setting for this sander?
The kit includes only the 3 in pad and the speed is fixed at 15000 rpm so there are no alternative sizes or settings to select.
What does the 15000 rpm figure mean when the tool is running on a job?
The disc spins at a constant 15000 rpm under load provided the air supply delivers 21 cfm at 90 psi through a 3/8 in hose.
What does the 1/4 in NPT air inlet limit in practice?
It requires a 1/4 in NPT fitting and a minimum 3/8 in hose to supply the 21 cfm at 90 psi the motor needs for full speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
