Chicago Pneumatic
Chicago Pneumatic CP2765 air screwdriver pistol grip 10 cfm 900 rpm 6.6 ft-lb
Pistol-grip air screwdriver delivers 6.6 ft-lb maximum torque at 900 rpm with direct-drive clutch for high-torque fastening
- TypeHex Drive Bits
- Pistol-grip ergonomics for comfortable extended use
- 900 rpm free speed drives fasteners quickly
- 6 ft-lb maximum torque handles tough joints
- Direct-drive clutch delivers consistent power
- 10 cfm average air consumption at 90 psi
Air Screwdriver Performance
The CP2765 is a pneumatic pistol-grip screwdriver built for general-duty fastening. It delivers a maximum torque of 6.6 ft-lb and a free speed of 900 rpm. Direct-drive clutch action provides immediate power transfer without mechanical cushioning. The tool requires 90 psi operating pressure and a 3/8 in minimum hose size.
Ideal Users and Limitations
This driver suits technicians who need high torque in a compact 7 in body for assembly or maintenance work. The 1/4 in hex bit holder accepts standard insert bits for quick changes. Buyers who need adjustable torque control should look elsewhere because the direct-drive clutch offers no torque limiting. Low-air-consumption environments may also find the 29.7 cfm full-load demand unsuitable.
Decisive Specification
The direct-drive clutch type is the single factor that determines suitability. It produces full motor torque on every trigger pull with no internal shut-off mechanism. This makes the tool fast for repetitive driving but unsuitable for joints that require a precise torque limit. Verify that your application can accept uncontrolled torque before purchasing.
Highlights
- Pistol-grip ergonomics for comfortable extended use
- 900 rpm free speed drives fasteners quickly
- 6 ft-lb maximum torque handles tough joints
- Direct-drive clutch delivers consistent power
- 10 cfm average air consumption at 90 psi
Specifications
| Brand | Chicago Pneumatic |
|---|---|
| Model | CP2765 |
| Type | Hex Drive Bits |
Questions about this item
What accessories come in the box with the CP2765 and what must I supply?
The CP2765 includes the pistol-grip air screwdriver with 1/4 in hex drive. You must supply a 3/8 in minimum air hose, 1/4 in NPT fitting and a 90 psi compressed-air source.
Which torque figure should I use to select the right CP2765 for my application?
Use the soft-draw torque of 79.2 in-lb for joint-tightening control; the 6.6 ft-lb maximum torque is the stall value and not for regular fastening.
What does the 900 rpm free speed mean when the CP2765 is running under load?
At 90 psi the tool runs at 900 rpm unloaded; under load speed drops and air consumption rises to 29.7 cfm, so size your compressor for that demand.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
