Chicago Pneumatic
Chicago Pneumatic CP2611 Air Screwdriver 1/4 in Hex 1000 RPM 7.5 ft-lb
Pistol-grip air screwdriver with 1/4 in hex drive, precision shut-off clutch, 1000 RPM free speed and 7.5 ft-lb maximum torque
- TypeHex Drive Bits
- Precision shut-off clutch prevents over-tightening
- 1,000 RPM free speed drives fasteners quickly
- 5 ft-lb maximum torque handles tough joints
- 1/4 in hex drive accepts standard bits
- Pistol-grip design gives comfortable control
Pistol-grip air screwdriver
The Chicago Pneumatic CP2611 is a pistol-grip air screwdriver built for industrial assembly. It accepts 1/4-inch hex drive bits and delivers a maximum torque of 7.5 ft-lb. A precision shut-off clutch stops the tool at the set torque to protect fasteners. Free speed reaches 1,000 RPM for efficient cycle times.
Assembly technicians and maintenance crews
This tool suits technicians who need repeatable torque control on production lines or in maintenance bays. Operators without a compressed-air supply capable of 90 psi and 21.0 CFM at full load should look at electric alternatives. Buyers needing higher torque ranges or angle-body access will require a different model.
Precision shut-off clutch
The defining specification is the precision shut-off clutch that halts rotation once the target torque is reached. This feature prevents over-tightening and ensures consistent joint quality on every fastener. The clutch operates across a soft-draw range of 8.9 to 66 in-lb.
Highlights
- Precision shut-off clutch prevents over-tightening
- 1,000 RPM free speed drives fasteners quickly
- 5 ft-lb maximum torque handles tough joints
- 1/4 in hex drive accepts standard bits
- Pistol-grip design gives comfortable control
Specifications
| Brand | Chicago Pneumatic |
|---|---|
| Model | CP2611 |
| Type | Hex Drive Bits |
Questions about this item
Will the CP2611 run on my existing 90 psi compressor with a 3/8 in hose?
Yes, the tool requires 90 psi and a minimum 3/8 in hose, matching common shop supply lines.
How can I verify the shut-off clutch is engaging at the correct torque?
The precision shut-off clutch stops the driver automatically within the 8.9 to 66 in-lb soft-draw range when the set torque is reached.
Does the CP2611 come with 1/4 in hex bits or do I buy them separately?
The driver accepts 1/4 in hex bits; bits are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
