Chicago Pneumatic
Chicago Pneumatic Air Disc Sander 7 in 0.7 hp 26 cfm 90 psi 5/8-11 spindle 6.45 kg
Air-powered 7-inch disc sander with variable speed to 5,000 RPM, 0.7 hp motor, 26 cfm at 90 psi, 5/8-11 spindle, 6.45 kg weight
- TypeAngle, Pitch & Slope Locators
- MaterialHAWA
- Weight6.45
- 7 hp motor delivers strong sanding power
- 5,000 RPM maximum disc speed for fast material removal
- 26 cfm air consumption at 90 psi operating pressure
- 5/8-11 spindle thread fits standard 7 in abrasive discs
- 45 kg weight with right-angle grip and side handle for control
Industrial Air Disc Sander
The Chicago Pneumatic Air Disc Sander is a 7-inch pneumatic tool built for industrial surface preparation. It delivers 0.7 hp and runs at a maximum speed of 5,000 RPM with variable control. The right-angle grip includes a side handle for operator leverage. A threaded 5/8-11 spindle secures abrasive discs directly.
Ideal for continuous material removal
This sander suits technicians who need sustained cutting action on metal or composite panels in a workshop with a robust air supply. The 26 cfm demand at 90 psi means it is not for users with small portable compressors or limited airflow capacity. Buyers who require integrated dust extraction should look at vacuum-ready models instead.
Verify compressor and hose specs
Confirm your compressor can sustain 26 cfm at 90 psi before ordering. The tool requires a minimum 3/8-inch hose and a 1/4-inch NPT inlet fitting. Ensure the work area can accommodate the 6.45 kg weight during extended use. Check that 7-inch threaded discs match your finishing requirements.
Highlights
- 7 hp motor delivers strong sanding power
- 5,000 RPM maximum disc speed for fast material removal
- 26 cfm air consumption at 90 psi operating pressure
- 5/8-11 spindle thread fits standard 7 in abrasive discs
- 45 kg weight with right-angle grip and side handle for control
Specifications
| Brand | Chicago Pneumatic |
|---|---|
| Type | Angle, Pitch & Slope Locators |
| Material | HAWA |
| Weight | 6.45 |
Questions about this item
What size air hose and fitting do I need to run this 0.7 hp sander at 26 cfm?
The tool requires a minimum 3/8 in hose and a 1/4 in NPT air inlet fitting to deliver the rated 26 cfm at 90 psi.
Can I keep using my existing 7 in abrasive discs with the 5/8-11 spindle?
Yes, the 5/8 in - 11 threaded spindle accepts standard 7 in threaded-shank discs up to the 5,000 RPM maximum speed.
How do I verify the sander is reaching the correct speed after hooking it up?
With 90 psi at the inlet and the lever throttle fully open, the disc should spin freely up to the rated 5,000 RPM under no-load conditions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
