Chicago-Latrobe
Chicago-Latrobe 78489 Spade Drill Bit 9/32 in 0.2813 Shank 2.5 L
Solid carbide spade drill bit cuts 9/32 inch holes with a 118-degree point and 2.5 inch overall length
- TypeDrill Bits
- MaterialHAWA
- Solid carbide construction resists wear for longer tool life
- 9/32 inch diameter suits precise fractional-inch drilling tasks
- 118-degree point angle centres quickly in metal and wood
- Bright uncoated finish reduces friction and chip adhesion
- 5 inch overall length fits standard drill chucks securely
Chicago-Latrobe 78489 Spade Drill Bit
The Chicago-Latrobe 78489 is a solid carbide spade drill bit built for machining hard materials. It targets professionals and workshops that need a rigid, wear-resistant cutter for precise holemaking in tough alloys.
Upgrading from high-speed steel or coated bits
Switching to this carbide bit makes sense when high-speed steel edges dull too quickly or when workpiece hardness demands the stiffness of solid carbide. The jump pays off in longer tool life and consistent hole quality on abrasive or hardened stock.
9/32 inch diameter with 0.2813 shank and 2.5 length
The 118-degree point and bright finish handle general-purpose drilling in steel, cast iron and non-ferrous metals with good chip evacuation. The solid carbide body resists deflection in deeper cuts, though the fixed 2.5-inch overall length limits reach in deep-hole applications.
Highlights
- Solid carbide construction resists wear for longer tool life
- 9/32 inch diameter suits precise fractional-inch drilling tasks
- 118-degree point angle centres quickly in metal and wood
- Bright uncoated finish reduces friction and chip adhesion
- 5 inch overall length fits standard drill chucks securely
Specifications
| Brand | CHICAGO-LATROBE |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
What shank diameter does the 78489 spade drill bit need for the chuck?
The bit has a 0.2813 in shank, so the chuck must accept that exact diameter.
How should the 118 degree point angle be aligned when starting a hole?
Keep the drill perpendicular to the workpiece so both cutting lips engage simultaneously; tilting causes the point to walk.
When does the solid carbide 9/32 in bit need replacement?
Replace it when the cutting edges dull enough to increase feed force or produce rough holes; carbide cannot be resharpened easily.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
