Chicago-Latrobe
Chicago-Latrobe 70226 13/32 in 118 Degree Jobber Drill Bit
13/32 inch high-speed steel jobber drill bit with 118-degree point and TiN coating
- TypeDrill Bits
- 13/32 inch fractional size matches common jobber requirements
- 118-degree conventional point centres quickly without pilot hole
- High-speed steel body resists wear in general-purpose drilling
- Titanium nitride coating reduces friction and extends cutting life
- Decimal equivalent .4063 simplifies metric-to-inch conversion
Chicago-Latrobe 70226 13/32 in Drill Bit
The Chicago-Latrobe 70226 is a fractional-inch jobber-length drill bit made from high-speed steel with a titanium nitride coating. It has a conventional point ground to a 118-degree angle and no coolant-through holes. The decimal equivalent of the size is .4063 inches.
Mechanics drilling soft to medium materials
This bit suits general-purpose drilling in metal, wood and plastic where a standard point angle centres reliably. Builders who need a split-point geometry for harder alloys or a coolant-fed design for deep-hole work should look at other tooling.
118-degree conventional point angle
The 118-degree point angle is the specification that decides if this bit matches the application. It centres well in softer stock but can walk on very hard or abrasive surfaces without a pilot hole.
Highlights
- 13/32 inch fractional size matches common jobber requirements
- 118-degree conventional point centres quickly without pilot hole
- High-speed steel body resists wear in general-purpose drilling
- Titanium nitride coating reduces friction and extends cutting life
- Decimal equivalent .4063 simplifies metric-to-inch conversion
Specifications
| Brand | CHICAGO-LATROBE |
|---|---|
| Type | Drill Bits |
Questions about this item
Should I choose the 13/32 inch jobber bit or another fractional size?
Choose 13/32 inch when the hole must be .4063 decimal equivalent; other fractional sizes in the same jobber series cover different diameters.
What does the 118 degree point angle mean once the bit is in the drill?
The 118 degree conventional point centres quickly in steel and wood without a pilot hole and clears chips through the flutes.
What shank standard does the 70226 use and what does it cap?
The bit has a straight round shank sized to the 13/32 inch diameter, so it fits any three-jaw chuck that opens to at least .4063 inch.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
