Chicago-Latrobe
Chicago-Latrobe 44235 35/64 in 118 Degree Jobber Length Drill Bit
A 35/64 inch high-speed steel jobber drill bit with a 118 degree conventional point for general purpose drilling
- TypeDrill Bits
- 35/64 inch diameter handles large-hole drilling tasks
- 118-degree conventional point starts cleanly in steel and cast iron
- Jobber-length design gives standard reach for general-purpose work
- High-speed steel construction resists heat during extended use
- Bright uncoated finish suits dry machining without coolant
Chicago-Latrobe 44235 Jobber Drill Bit
The Chicago-Latrobe 44235 is a jobber length drill bit sized at 35/64 inch. It features a 118 degree conventional point angle and is manufactured from high speed steel with a bright uncoated finish. The decimal equivalent is .5469 inch for precise measurement reference.
Suits general purpose drilling tasks
This bit suits workshops drilling steel or iron where a standard jobber length is required. It is not for buyers needing coolant through capability or a coated surface for extended wear resistance. Users requiring a different point angle or fractional size should look at other options.
35/64 inch fractional size decides fit
The 35/64 inch diameter is the single specification that determines whether this bit matches the hole required. Verify the decimal equivalent of .5469 inch against your project plans before ordering. An incorrect size cannot be corrected after the hole is drilled.
Highlights
- 35/64 inch diameter handles large-hole drilling tasks
- 118-degree conventional point starts cleanly in steel and cast iron
- Jobber-length design gives standard reach for general-purpose work
- High-speed steel construction resists heat during extended use
- Bright uncoated finish suits dry machining without coolant
Specifications
| Brand | CHICAGO-LATROBE |
|---|---|
| Type | Drill Bits |
Questions about this item
What drill chuck size do I need to hold the 35/64 in shank?
A chuck that opens to at least .5469 in will grip the 35/64 in drill bit securely.
Will the 118 degree point angle cut cleanly in the mild steel I usually drill with older bits?
The 118 degree conventional point is designed for general-purpose drilling in mild steel and similar materials.
How can I confirm the 44235 bit is cutting correctly after I start the hole?
Look for steady, golden chips and a round hole matching the .5469 in decimal size without excessive heat.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
