Chicago-Latrobe
Chicago-Latrobe 42020 135 Degree Wide Land Parabolic Jobber Length Drill pneumatic accessory
135-degree split-point drill bit with TiCN coating cuts 5/16 inch holes in metal
- TypeDrill Bits
- MaterialHAWA
- 135-degree split point starts on contact without wandering
- Wide-land parabolic flute clears chips faster in deep holes
- TiCN coating reduces wear on high-speed steel substrate
- Jobber length reaches standard depths for general-purpose drilling
- 5/16 inch fractional size matches common fastener pilot holes
Chicago-Latrobe 42020 Jobber Drill
The Chicago-Latrobe 42020 is a 135 degree wide land parabolic jobber length drill bit designed for general-purpose drilling in metal. It features a split point tip for accurate starts and is constructed from high speed steel with a TiCN coating for wear resistance.
Users drilling mild steel and aluminium
This bit suits mechanics and fabricators drilling mild steel, aluminium and similar materials where the parabolic flute aids chip removal. Buyers needing coolant-through capability or a different point angle for specialised alloys should look at other tooling.
135 degree split point geometry
The 135 degree split point reduces walking on contact and lowers thrust force compared to standard points. This single specification determines whether the bit matches the material hardness and machine rigidity of your application.
Highlights
- 135-degree split point starts on contact without wandering
- Wide-land parabolic flute clears chips faster in deep holes
- TiCN coating reduces wear on high-speed steel substrate
- Jobber length reaches standard depths for general-purpose drilling
- 5/16 inch fractional size matches common fastener pilot holes
Specifications
| Brand | CHICAGO-LATROBE |
|---|---|
| Type | Drill Bits |
| Material | HAWA |
Questions about this item
What does the 135-degree split point do once the bit is in the drill?
The 135-degree split point centres the bit instantly and reduces walking on hard materials, so the hole starts exactly where you place it.
How does the TiCN coating affect drilling performance?
TiCN increases surface hardness and heat resistance, letting the bit stay sharp longer and run at higher speeds without overheating.
Will the 5/16-inch shank fit a standard three-jaw chuck?
Yes, the 5/16-inch shank is sized for any drill chuck that accepts up to that diameter, so it mounts securely in most portable drills and drill presses.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
