We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PVDF tee fitting with three 1/2 inch FNPT threads

Chemtrol

Chemtrol 651233 Tee 1/2in FNPT PVDF Schedule 80 1360 PSI

SKU CH-7WCQ-SJRF2

Schedule 80 PVDF tee with three 1/2-inch FNPT ports rated to 1360 PSI and 73 to 280 °F

  • Schedule 80 wall handles 1360 PSI max pressure
  • Kynar PVDF resists chemicals from 73 to 280 °F
  • Female NPT threads on all three ports for quick assembly
  • Red colour matches ASTM D-3222 standard identification
  • NIBCO brand ensures reliable Schedule 80 fitting quality

Chemtrol PVDF Tee 1/2in FNPT Schedule 80

This Chemtrol tee fitting connects three 1/2 inch female NPT threads in a Schedule 80 PVDF construction. It suits industrial piping systems that handle corrosive fluids at elevated temperatures. The red Kynar body resists chemical attack and meets ASTM D-3222 standards for thermoplastic pipe fittings.

Threaded installation requires clean threads

Apply PTFE tape or compatible pipe dope to male threads before engagement to prevent leaks. Hand-tighten then add one to two turns with a strap wrench; over-tightening can stress the thermoplastic body. Misaligned piping induces bending loads that may crack the fitting over time.

Verify system pressure

Confirm the operating pressure stays below 1360 PSI and the fluid temperature remains between 73 and 280 degrees Fahrenheit. Ensure the mating pipe schedule and thread type match 1/2 inch NPT. Chemical compatibility with PVDF material must be validated for the specific process media.

Highlights

  • Schedule 80 wall handles 1360 PSI max pressure
  • Kynar PVDF resists chemicals from 73 to 280 °F
  • Female NPT threads on all three ports for quick assembly
  • Red colour matches ASTM D-3222 standard identification
  • NIBCO brand ensures reliable Schedule 80 fitting quality

Specifications

BrandNIBCO

Questions about this item

How can I verify the Chemtrol 651233 tee is functioning correctly after installation?

Pressurise the system up to the 1360 PSI rating and inspect all three FPT connections for leaks; the fitting should hold pressure across the 73 to 280 °F temperature range without weeping.

What comes with the Chemtrol 651233 tee and what must I supply myself?

The box contains the single red Kynar tee with three 1/2 inch FPT ports; you must provide compatible 1/2 inch male NPT pipe or nipples and suitable thread sealant for the connections.

Which specification should I match when selecting this Chemtrol 651233 tee?

Choose this model when your system requires a Schedule 80 PVDF tee rated for 1360 PSI at 73 °F, with 1/2 inch FPT threads and ASTM D-3222 compliance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.