We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White PVDF 90-degree elbow 3/4 NPT Schedule 80 fitting

Chemtrol

Chemtrol 650733 90 Elbow 3/4 NPT PVDF Schedule 80 coupling

SKU CH-0RY4-E9RST

A 90-degree Schedule 80 PVDF elbow with 3/4 NPT female threads rated to 360 psi and 73 to 280 degrees F

  • 90-degree PVDF elbow redirects flow in corrosive systems
  • Schedule 80 wall handles 360 psi at 73 °F
  • Female NPT threads seal without extra fittings
  • PVDF body resists chemicals from 73 to 280 °F
  • 2 29/64 in length fits tight piping runs

Chemtrol 90° PVDF Elbow

The Chemtrol 90-degree elbow connects two 3/4-inch NPT female threads in a Schedule 80 PVDF piping system. It is built for industrial fluid handling where chemical resistance and pressure integrity are required.

Seal Included

A seal is supplied with the fitting so the joint can be made up without sourcing a separate gasket. This reduces assembly time and ensures the sealing material matches the PVDF body.

360 psi at 73°F

The coupling is rated for 360 psi maximum operating pressure at 73 degrees Fahrenheit and remains serviceable up to 280 degrees Fahrenheit. It is not suited for systems that exceed this pressure or temperature envelope.

Highlights

  • 90-degree PVDF elbow redirects flow in corrosive systems
  • Schedule 80 wall handles 360 psi at 73 °F
  • Female NPT threads seal without extra fittings
  • PVDF body resists chemicals from 73 to 280 °F
  • 2 29/64 in length fits tight piping runs

Specifications

BrandNIBCO

Questions about this item

Will the PVDF threads or seal on this 3/4 NPT elbow need periodic replacement?

The fitting is a single-piece Schedule 80 PVDF elbow with an included seal; no separate thread or seal replacement interval is specified.

What pressure or temperature limit will be reached first during continuous service?

The maximum operating pressure is 360 psi at 73 °F; pressure rating decreases as temperature rises toward the 280 °F upper limit.

Does the PVDF material generate noticeable heat or noise when fluid runs through it all day?

PVDF is a non-metallic thermoplastic; it does not produce mechanical noise and its thermal conductivity is low, so the elbow itself adds negligible heat to the system.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.