Champion Power Equipment
Champion Power Equipment 48043 Generator Power Cord 25 ft 10 AWG 30 A L14-30P to 5-20R
Connects a 30 A L14-30P generator outlet to two 20 A 5-20R receptacles using 10 AWG SJTW cord rated 125/250 V AC and cULus listed
- 25 ft length reaches distant outlets easily
- 10 AWG wire handles 30 A continuous load
- L14-30P plug connects directly to generator
- Dual 5-20R receptacles power standard devices
- cULus listed jacket resists outdoor conditions
25 ft 30 A Generator Extension Cord
This 25 ft extension cord connects a generator with an L14-30P outlet to equipment using standard 5-20R plugs. It is built for owners of portable generators who need to reach tools or appliances across a worksite or yard. The cord carries a 30 A rating at 125/250 V AC and is cULus listed for safety compliance.
10 AWG Three-Conductor Capacity
The cord uses 10 AWG SJTW thermoplastic jacketed wire with three conductors rated for 30 A continuous current. It comfortably handles high-draw devices such as compressors, heaters or multiple power tools on a single generator circuit. Runs exceeding 25 ft or loads above 30 A will require a heavier gauge or shorter length to avoid voltage drop.
L14-30P to 5-20R Connection Flexibility
The locking L14-30P plug secures to the generator receptacle while the 5-20R connector accepts standard 20 A household plugs. This arrangement frees the generator’s twist-lock outlet for a single cord that then powers everyday tools without adapters. Builds needing a straight-blade generator inlet or a different receptacle configuration cannot use this cord.
Highlights
- 25 ft length reaches distant outlets easily
- 10 AWG wire handles 30 A continuous load
- L14-30P plug connects directly to generator
- Dual 5-20R receptacles power standard devices
- cULus listed jacket resists outdoor conditions
Specifications
| Brand | CHAMPION POWER EQUIPMENT |
|---|
Questions about this item
Will the L14-30P plug on this cord fit the 30 A twist-lock outlet on my existing generator?
Yes, the cord has an L14-30P plug rated for 30 A at 125/250 V AC, matching a standard generator twist-lock receptacle.
How can I verify the cord is delivering power correctly once connected?
Plug the L14-30P end into the generator, connect a load to the 5-20R receptacles, and confirm the devices operate; the cULus listing indicates it meets safety standards for the rated 30 A current.
What connectors come on the cord and do I need to buy any separate adapters?
The cord has a single L14-30P plug on one end and 5-20R receptacles on the other; no additional adapters are included in the box.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
