We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Braided stainless steel steam dryer kit with hose, adapter and Y-connector

CERTIFIED APPLIANCE ACCESSORIES

CERTIFIED APPLIANCE ACCESSORIES 6 Ft Steam Dryer Kit Braided Stainless Steel Hose Adapter Y-Connector

SKU CH-T7B6-502FK

Kit includes a 6 ft braided stainless steel fill hose with 90° brass elbow, a 1 ft inlet adapter and a Y-connector for steam dryer hookup

  • TypeConnector
  • 6 ft braided stainless steel hose reaches distant water supplies
  • 90° brass elbow eases tight-space connections
  • 1 ft inlet adapter bridges mismatched fittings
  • Y-connector splits one supply for washer and dryer
  • Licensed professional installation recommended for safe setup

Universal Steam Dryer Kit

This braided stainless steel installation kit provides all the components required to connect a steam dryer to a water supply. It is designed for homeowners or installers fitting a new or replacement steam dryer in a standard laundry setup. The package bundles a fill hose, an inlet adapter and a Y-connector so no separate parts need to be sourced. Professional installation is recommended by the manufacturer.

6 ft Fill Hose and 1 ft Adapter

The kit includes a 6 ft braided stainless steel fill hose with a 90° brass elbow and a 1 ft braided stainless steel inlet adapter, both using 3/4" garden hose threads. These lengths suit typical side-by-side or stacked laundry layouts where the water valve is within a few feet of the dryer. Longer runs or non-standard valve positions would require additional extensions not supplied in this kit.

Y-Connector for Dual Supply

The included Y-connector splits a single 3/4" FGH supply into two 3/4" MGH outlets, letting the dryer share the cold water line with a washer or other appliance. This removes the need to plumb a dedicated valve for the steam function alone. Installations that already have a dedicated steam valve or that use a different thread standard will not need this connector.

Highlights

  • 6 ft braided stainless steel hose reaches distant water supplies
  • 90° brass elbow eases tight-space connections
  • 1 ft inlet adapter bridges mismatched fittings
  • Y-connector splits one supply for washer and dryer
  • Licensed professional installation recommended for safe setup

Specifications

TypeConnector

Questions about this item

Will the 6 ft braided stainless steel fill hose with its 90° brass elbow connect to my existing 3/4" garden hose fittings?

Yes, the hose carries a 3/4" female garden hose thread on one end and a 3/4" male garden hose thread on the other, so it threads directly onto standard laundry connections.

How can I verify the Y-connector is sealing properly once installed?

After turning on the water, check each of the three Y-connection points for drips; the braided stainless construction should show no moisture at the brass threads.

Does the kit include the 1 ft inlet adapter and Y-connector, or must they be purchased separately?

The package contains the 6 ft fill hose, the 1 ft braided stainless inlet adapter, and the Y-connector — no extra parts are required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.