CEM
CEM DT-8856H Non-contact Infrared Thermometer -50~1350°C 16:1 D:S 1999 digits electrician tool
Measures -50 to 1350°C from a distance with 16:1 optics, adjustable emissivity 0.10–1.0, and a 1999-digit backlit display
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Measures from a safe distance with 16:1 optics
- Covers extreme heat up to 1350°C
- Adjustable emissivity from .10 to 1.0 for accuracy
- Captures max, min, average and difference readings
- 1999-digit backlit display shows clear data in low light
Measurement range and distance ratio
The CEM DT-8856H is a non-contact infrared thermometer built for electricians and maintenance technicians who need to check surface temperatures from a distance. It measures from -50 °C to 1350 °C with a 16:1 distance-to-spot ratio, so the target area stays small even when the meter is held further away. A built-in laser sight helps centre the spot quickly. The 1999-count display shows maximum, minimum, average and difference readings with a backlight for low-light work.
Suitable users and limitations
This tool suits professionals who must verify hot electrical connections, motor bearings or HVAC ducts without shutting equipment down. Adjustable emissivity from 0.10 to 1.0 covers most common surfaces. Buyers who need contact probes, data logging to a PC or a certified calibration certificate should look elsewhere. The unit ships without batteries and the manual is not supplied in English.
Deciding specification
The -50 °C to 1350 °C measurement span combined with the 16:1 optics determines whether this thermometer can replace a contact probe on the intended targets. If the application requires reading temperatures above 1350 °C or demands a tighter spot size at long range, this model will not meet the requirement.
Highlights
- Measures from a safe distance with 16:1 optics
- Covers extreme heat up to 1350°C
- Adjustable emissivity from .10 to 1.0 for accuracy
- Captures max, min, average and difference readings
- 1999-digit backlit display shows clear data in low light
Specifications
| Brand | CEM |
|---|---|
| Model | DT-8856H |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
How do I verify the DT-8856H is reading correctly after setup?
Point the thermometer at a known reference source and confirm the display shows a value within the -50 to 1350 range with the laser spot centred on the target.
What does the box contain and what must I purchase separately?
The unit ships as a single red DT-8856H thermometer; batteries are not included and must be sourced locally.
Which version of the DT-8856H should I choose for high-temperature work?
The DT-8856H covers -50 to 1350 with a 16:1 distance-to-spot ratio and adjustable emissivity from .10 to 1.0, suiting most high-temperature tasks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
