We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey copolymer polypropylene inlay shaped to cradle a Distagon T 2/25mm lens inside a Milvus case

Carl Zeiss

Carl Zeiss Inlay for Distagon T 2/25mm Lens #2155-359

SKU CH-3DH7-8P88X

Protective copolymer polypropylene inlay fits the Distagon T 2/25mm lens inside Milvus cases, measuring 4.7 x 4.0 x 3.1 inches and weighing .4 oz

  • Custom-fit protection for Distagon T 2/25mm lens
  • Copolymer polypropylene shell absorbs external impact
  • Lightweight 11.34 g inlay adds minimal bulk
  • Fits both Canon and Nikon mounts inside Milvus case
  • Compact 4.7 x 4.0 x 3.1 inch profile for easy storage

Purpose-built protection

This Zeiss inlay is moulded specifically for the Distagon T 2/25mm lens and fits both the Canon and Nikon versions inside the Milvus case. The copolymer polypropylene shell absorbs external impacts while holding the optic firmly in place. Photographers who transport this focal length regularly gain a snug, lightweight insert that prevents movement without adding bulk. It will not fit older SLR cases, so owners of those cases should look elsewhere.

Materials and daily handling

The copolymer polypropylene construction weighs just .4 oz and measures 4.7 x 4.0 x 3.1 inches, adding negligible mass to a kit bag. The rigid yet slightly resilient material resists knocks during normal carry and does not deform under the lens’s own weight. No moving parts or fasteners mean silent operation and zero maintenance in everyday use. The precise internal contours keep the Distagon centred without pressure points.

Sustained transport resilience

Under prolonged vibration or repeated packing cycles the inlay retains its shape and continues to cradle the 25mm lens securely. The closed-cell structure does not compress permanently, so protection remains consistent after months of field work. Because the insert is a single moulded piece there are no seams to split or linings to wear through during heavy use. The lens stays isolated from case walls and other gear throughout extended journeys.

Highlights

  • Custom-fit protection for Distagon T 2/25mm lens
  • Copolymer polypropylene shell absorbs external impact
  • Lightweight 11.34 g inlay adds minimal bulk
  • Fits both Canon and Nikon mounts inside Milvus case
  • Compact 4.7 x 4.0 x 3.1 inch profile for easy storage

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the inlay into the Milvus case, and what is the step people get wrong?

Place the inlay with the shaped cavity facing up, lower the Distagon T 2/25mm lens straight down until it seats, then close the case lid; the common error is trying to fit it into an older SLR case where the 4.7 x 4.0 x 3.1 inch dimensions do not match.

What maintenance or replacement will the copolymer polypropylene inlay need later?

Wipe the inlay with a damp cloth when dust builds up; the material resists impact and does not degrade under normal storage, so replacement is only necessary if a crack appears from a drop.

What limit shows up first under sustained use of the inlay?

The inlay is a passive protective insert with no moving parts or electronics, so no performance limit appears during normal, long-term use inside the Milvus case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.