CAP Barbell RPS-7.5 1.25 lb Cast Iron Plate Set of 6
Set of six 1.25 lb cast-iron plates with 1-inch centre holes for standard bars
- Compatibility/FitmentRPS-7.5
- Solid cast iron with baked enamel resists chipping through heavy use
- 1-inch centre hole fits standard bars for quick plate changes
- Set of six 1.25 lb plates adds 7.5 lb total for micro-loading
- Ground edges and raised numbers speed identification during workouts
- CAP Barbell — 40 years supplying fitness equipment worldwide
1.25 lb Cast Iron Plate Set
The CAP Barbell RPS-7.5 set delivers six solid cast iron plates weighing 1.25 lb each for a total of 7.5 lb. A black baked enamel finish resists chipping and peeling while ground edges and a machined 1-inch centre hole ensure a consistent fit on standard bars. Raised numbers allow quick weight identification during exercise changes. Suitable for home gym strength training and general weightlifting.
Suits micro-loading and warm-up needs
Lifters who need small increments for progressive overload or light warm-up sets will find the 1.25 lb plates practical. The set is less useful for anyone requiring heavier single plates to reach working loads quickly. Buyers who want Olympic 2-inch sleeves should look at a different specification. The enamel coating handles repeated racking but is not a bumper plate designed for dropping.
1-inch centre hole for standard bars
The machined 1-inch centre hole is the single specification that determines bar compatibility. It fits standard diameter bars only and will not seat on Olympic sleeves. Verify your bar diameter before purchasing.
Highlights
- Solid cast iron with baked enamel resists chipping through heavy use
- 1-inch centre hole fits standard bars for quick plate changes
- Set of six 1.25 lb plates adds 7.5 lb total for micro-loading
- Ground edges and raised numbers speed identification during workouts
- CAP Barbell — 40 years supplying fitness equipment worldwide
Specifications
| Brand | CAP Barbell |
|---|---|
| Model | RPS-7.5 |
| Compatibility/Fitment | RPS-7.5 |
| Part Number | RPS-7.5 |
Questions about this item
What size bar does the 1-inch center hole on these 1.25 lb plates fit?
The 1-inch center hole fits standard bars with a 1-inch sleeve diameter.
How do I load the plates onto a standard bar and what step is often missed?
Slide each plate onto the bar sleeve and secure with collars; the step often missed is tightening the collars so plates cannot shift during lifts.
Will the black baked enamel coating on these cast iron plates need any upkeep?
The coating resists chipping and peeling; wipe plates dry after use and store in a low-humidity area to prevent surface rust on any exposed edges.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
