We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black cylindrical lens hood with bayonet mount and Canon branding

Canon

Canon ET-65 III lens hood for EF 85mm f/1.8 USM

SKU CH-MKRX-D7RV6

Dedicated lens hood for Canon EF 85mm f/1.8 USM that blocks stray light, reduces flare and protects the front element from impacts and weather

  • Shades stray light for richer contrast and reduced flare
  • Shields front element from moisture, dust and wind-blown debris
  • Protects lens barrel against accidental bumps in tight spaces
  • Designed for EF 85mm f/1.8 USM and other Canon EF lenses
  • Precision fit maintains optical performance without vignetting

Compatible lens hood for EF 85mm f/1.8 USM

The Canon ET-65 III lens hood is designed for Canon EF lenses including the EF 85mm f/1.8 USM, EF 100mm f/2 USM, EF 70-210mm f/3.5-4.5 USM, EF 135mm f/2.8 SF, and EF 100-300mm f/4.5-5.6 USM. It attaches to the front of these lenses to shade the front element from stray light. Photographers using any of the listed lenses can fit this hood to reduce flare and protect the barrel.

Stray light reduction and physical protection

The hood blocks off-axis light that causes flare and ghosting, helping to preserve contrast and colour depth in high-contrast scenes. Its rigid construction also acts as a barrier against rain, dust and wind-blown debris reaching the front glass. Additionally, the extended rim absorbs impacts from walls, door frames and other obstacles encountered while shooting.

Not for lenses outside the specified EF mount list

This hood only fits the five Canon EF lenses named above. It cannot be mounted on EF-S, RF, or other EF lenses with different front diameters or bayonet patterns. Buyers who own a lens not in that list will need a different hood model. Photographers requiring a collapsible rubber hood or a petal-shaped design for wide-angle zooms should look elsewhere.

Highlights

  • Shades stray light for richer contrast and reduced flare
  • Shields front element from moisture, dust and wind-blown debris
  • Protects lens barrel against accidental bumps in tight spaces
  • Designed for EF 85mm f/1.8 USM and other Canon EF lenses
  • Precision fit maintains optical performance without vignetting

Specifications

No published specifications for this item yet.

Questions about this item

How do I attach the ET-65 III hood to the EF 85mm f/1.8 USM without it coming loose?

Align the hood’s bayonet tabs with the lens barrel slots, rotate clockwise until it clicks, and verify the alignment mark sits flush — a partial turn is the common mistake.

Will the ET-65 III’s finish or mounting tabs wear out and need replacement?

The hood is a single moulded plastic piece with no moving parts; it does not require scheduled replacement unless cracked from impact.

At what focal length on the EF 70-210mm f/3.5-4.5 USM does vignetting appear with the ET-65 III fitted?

The hood is optimised for the 85 mm and 100 mm primes; at the 70 mm wide end of the zoom, slight corner shading can occur.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.