We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal mini ball head with cold shoe base and removable bottom shoe mount, silver finish, 1/4 inch top screw

Camvate

Camvate Mini Ball Head C1488 Cold Shoe Bottom Mount 90° 4.40 lb

SKU CH-JXVG-XBPC5

Mini ball head with cold shoe base and removable bottom shoe mount, 90° vertical articulation, 1/4"-20 top thread, supports 4.40 lb load

  • 90° vertical tilt for flexible camera positioning
  • 40 lb load capacity supports monitors and lights
  • Cold shoe mount attaches directly to camera hot shoe
  • Removable bottom shoe mount adds mounting versatility
  • 1/4"-20 top thread fits standard accessory threads

What this mini ball head does

The Camvate Mini Ball Head C1488 attaches to a camera hot shoe and provides a 1/4"-20 screw thread for mounting accessories. Its 90 degree vertical articulation lets you tilt the attached item straight down for low-angle work. The unit is rated for a maximum load of 4.40 lb. The bottom shoe mount is removable for flexible configuration.

Behaviour under sustained load

The 4.40 lb capacity is a static limit; continuous vibration or off-centre leverage will reduce the safe working margin. Tighten the locking knob firmly before each session to prevent gradual creep during long takes. Periodic checks are advised when the head is kept at extreme tilt angles for extended periods.

Check your setup before ordering

Verify that your camera hot shoe accepts a standard 1/4"-20 mounting foot and that the accessory you plan to mount uses the same thread. The removable bottom shoe adds height; confirm there is clearance above the camera body. Buyers who need a larger load rating or a different mounting standard should look elsewhere.

Highlights

  • 90° vertical tilt for flexible camera positioning
  • 40 lb load capacity supports monitors and lights
  • Cold shoe mount attaches directly to camera hot shoe
  • Removable bottom shoe mount adds mounting versatility
  • 1/4"-20 top thread fits standard accessory threads

Specifications

No published specifications for this item yet.

Questions about this item

Does the Camvate C1488 generate heat or noise during extended use?

The C1488 is a passive mechanical ball head with no moving electronics, so it produces zero noise and no heat regardless of how long it is mounted.

What must I already own to attach the C1488 to my camera?

You need a camera with a standard hot shoe and an accessory that mounts via a 1/4"-20 thread on top of the ball head.

Will the 1/4"-20 screw on the C1488 work with older tripod plates I already have?

Yes, the top mounting point is a standard 1/4"-20 thread, compatible with most legacy quick-release plates and accessories.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.