We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass tank cross tee with male and female threaded ends

Campbell

Campbell UTC5-4-3LF Tank Cross Tee 1 1/4 M x 1 F equipment

SKU CH-B44K-XCCS3

Connects a 1-1/4 inch male and 1 inch female pipe with additional 1/4 and 1/2 inch taps in a brass tee body

  • Brass construction resists corrosion for long service life
  • Male and female threads allow direct tank connection
  • Cross-tee layout provides four outlets from one fitting
  • 1/4 in top tap suits pressure gauges or switches
  • 1/2 in front tap fits standard drain or relief valves

Tank Cross Tee for well water systems

The Campbell UTC5-4-3LF Tank Cross Tee is a brass well water tank fitting designed for installers who need a compact connection point on a pressure tank. Its male 1 1/4 inch and female 1 inch ends allow direct integration into existing tank piping without additional adapters.

Behaviour under sustained system pressure

The brass body resists corrosion from continuous water exposure and maintains sealing integrity through repeated pressure cycles in a well pump system. The 3 3/4 inch overall length keeps the assembly short, reducing mechanical leverage on the tank tapping during vibration or thermal expansion.

Male 1 1/4 by female 1 inch sizing

This specific combination of top tap 1/4 inch, front tap 1/2 inch, and the M x F thread orientation determines whether the tee matches the tank opening and the downstream plumbing layout. Verify both thread sizes and the tee configuration before purchase.

Highlights

  • Brass construction resists corrosion for long service life
  • Male and female threads allow direct tank connection
  • Cross-tee layout provides four outlets from one fitting
  • 1/4 in top tap suits pressure gauges or switches
  • 1/2 in front tap fits standard drain or relief valves

Specifications

BrandCAMPBELL

Questions about this item

How much noise, heat or power does the Campbell UTC5-4-3LF tank cross tee produce when installed in a well water system?

The brass fitting is a passive component with no moving parts, so it generates no noise, heat or power draw during continuous operation.

What pipe sizes and thread types must already be present for the 1 1/4 M x 1 F connections to seal correctly?

You need a 1-1/4 inch male NPT thread on the tank side and a 1 inch female NPT thread on the piping side for the male/female ends to engage properly.

Will the 1/4 inch top tap and 1/2 inch front tap align with existing pressure switches or gauges on an older tank?

The 1/4 inch top and 1/2 inch front taps are standard NPT sizes used on many legacy well tanks, so most existing switches and gauges will thread directly in.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.