Campbell
Campbell TS-48 Torque Arrestor PVC/Stainless Steel conveying
A torque arrestor for 4–8 in casing and 1–2 in drop pipe, built from PVC and stainless steel
- MaterialHAWA
- Compatible with 4 in to 8 in casing
- Handles 1 in to 2 in drop pipe
- PVC and stainless steel body resists corrosion
- Campbell brand trusted for lifting hardware
- Model TS-48 designed for torque arresting
Campbell TS-48 Torque Arrestor
The Campbell TS-48 Torque Arrestor is designed for water-well installations that require rotational restraint on the drop pipe. It fits inside casings with an inside diameter of 4 in to 8 in and accepts drop-pipe diameters of 1 in to 2 in. The body is constructed from PVC and stainless steel for corrosion resistance in submerged environments.
Sustained-load behaviour
The arrestor engages the casing wall to counteract torque generated by the pump motor during continuous operation. Its PVC and stainless-steel construction maintains structural integrity under constant rotational force without deforming. The device is rated for the full diameter ranges stated, providing reliable restraint throughout extended duty cycles.
Thermals, noise and power
As a passive mechanical component, the torque arrestor produces no heat, noise or electrical draw during normal use. It requires no external power supply or cooling system. The materials are selected for long-term immersion in groundwater without degradation.
Highlights
- Compatible with 4 in to 8 in casing
- Handles 1 in to 2 in drop pipe
- PVC and stainless steel body resists corrosion
- Campbell brand trusted for lifting hardware
- Model TS-48 designed for torque arresting
Specifications
| Brand | CAMPBELL |
|---|---|
| Material | HAWA |
Questions about this item
How much heat does the PVC/stainless steel body absorb when the Campbell TS-48 runs continuously?
The PVC and stainless steel construction dissipates operational heat without active cooling, so surface temperature stays within safe handling limits during extended conveying cycles.
Which pipe and casing sizes must already be on site for the TS-48 to install?
You need drop pipe between 1 in and 2 in diameter and a well casing with 4 in to 8 in inside diameter for the arrestor to seat correctly.
Will the TS-48 damage older galvanised drop pipe left in the well?
The stainless steel grip teeth engage only the pipe wall, so existing galvanised pipe within the 1 in to 2 in range is held without cutting or corrosion transfer.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
