Campbell
Campbell MDC8 Drive Cap Iron 2in
Cast iron drive cap with a 2-inch outside diameter for lifting applications
- MaterialHAWA
- Cast-iron body resists wear in heavy lifting
- 2-inch outside diameter fits standard drive assemblies
- Campbell brand trusted for hardware reliability
- New condition ensures full service life from installation
- Suitable for lifting, pulling and conveying tasks
Campbell MDC8 Drive Cap
The Campbell MDC8 is a cast-iron drive cap designed for lifting, pulling and conveying applications. It provides a durable connection point for wire rope or chain in material-handling setups. The 2-inch outside diameter suits standard rigging hardware used in automotive and industrial maintenance. This component is sold new and ready for installation.
Cast iron construction limits
Cast iron delivers high compressive strength but is brittle under shock loading or sudden impact. The material resists wear from repeated rope contact yet can fracture if overloaded beyond its rated capacity. Users must avoid side-loading angles that concentrate stress on the cap body. Regular inspection for cracks is essential before each use.
Two-inch diameter capacity
The 2-inch outside diameter accommodates common wire-rope sizes and shackle pins found in workshop hoists and pullers. It handles typical automotive drivetrain removal and light conveyor tensioning tasks. The cap runs out of headroom when loads approach the working-load limit of the attached rope or chain. Orders of 75 or more qualify for free shipping from the supplier.
Highlights
- Cast-iron body resists wear in heavy lifting
- 2-inch outside diameter fits standard drive assemblies
- Campbell brand trusted for hardware reliability
- New condition ensures full service life from installation
- Suitable for lifting, pulling and conveying tasks
Specifications
| Brand | CAMPBELL |
|---|---|
| Material | HAWA |
Questions about this item
Which Campbell drive cap should I choose for a 2-inch diameter application?
The MDC8 model has a 2-inch outside diameter and a cast iron body, making it the correct cap for that shaft size.
What does the 2-inch diameter mean when the cap is installed on a winch or hoist?
It matches a 2-inch drum or shaft so the cap seats flush and transfers torque without eccentric loading.
How does the cast iron construction affect the cap's load rating and wear life?
Cast iron provides high compressive strength and abrasion resistance, so the cap sustains heavy lifts and resists groove wear over repeated cycles.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
