We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small zinc-plated steel clevis grab hook with open throat

Campbell

Campbell 1/4" Clevis Grab Hook Grade 43 Zinc Plated T9501424

SKU CH-FNB3-8HSWM

Grade 43 steel clevis grab hook accepts 1/4 inch chain with a 2,600 lb working load limit

  • TypeHook & Loop
  • 2,600 lb working load limit for heavy-duty securing
  • Grade 43 steel construction resists wear and deformation
  • Zinc-plated finish protects against corrosion outdoors
  • Clevis design with 3/8 in pin enables quick chain attachment
  • Fits 1/4 in Grade 43 chain for compatible rigging

Campbell 1/4" Clevis Grab Hook

This Campbell 1/4" Clevis Grab Hook is a Grade 43 steel component rated for a working load limit of 2,600 lb. It is designed for securing Grade 43 chain with a 1/4 in trade size in non-lifting applications. The zinc plated finish provides corrosion resistance for outdoor or industrial use.

Clevis pin installation with 3/8 in diameter

Installation uses a 3/8 in clevis pin through the 5/16 in clevis inside width. The fixed clevis attachment means the hook orientation cannot be adjusted after the pin is secured. Ensure the pin is fully seated and retained to prevent accidental release under load.

Grade 43 chain compatibility only

This hook is compatible only with Grade 43 chain at the 1/4 in trade size. It is explicitly marked as not for lifting, so it must not be used for overhead hoisting or personnel support. The working load limit applies only to in-line pulls with properly matched chain.

Highlights

  • 2,600 lb working load limit for heavy-duty securing
  • Grade 43 steel construction resists wear and deformation
  • Zinc-plated finish protects against corrosion outdoors
  • Clevis design with 3/8 in pin enables quick chain attachment
  • Fits 1/4 in Grade 43 chain for compatible rigging

Specifications

BrandCAMPBELL
TypeHook & Loop

Questions about this item

How do I confirm the 1/4" clevis grab hook is correctly installed and ready for its 2,600 lb working load limit?

Verify the clevis pin diameter of 3/8 in fits securely through the 5/16 in clevis inside width and that the hook opening width of 1/4 in matches the compatible Grade 43 chain trade size. The usable length of 1 5/8 in should allow full chain engagement without binding.

What comes with the Campbell T9501424 hook and what must be purchased separately?

The package contains the zinc-plated Grade 43 clevis grab hook with a 3/8 in clevis pin. Compatible 1/4 in Grade 43 chain is not included and must be bought separately to match the hook's working load limit of 2,600 lb.

Which version of the Campbell grab hook should I choose for 1/4 in Grade 43 chain?

Select the T9501424 model with 1/4 in hook opening width, 5/16 in clevis inside width, and 3/8 in clevis pin diameter. These dimensions match 1/4 in Grade 43 chain and provide a 2,600 lb working load limit for non-lifting applications.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.