We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver lithium-ion battery pack, 50.7 by 37.55 by 10.5 mm

CameronSino

CameronSino 1800mAh PDA Battery For DELL PowerEdge 2600 2650 4600 PE1650 PE2600

SKU CH-M4T7-DBV0D

1800mAh 3.7V lithium-ion PDA battery fits DELL PowerEdge 1650, 1750, 2600, 2650, 4600 and UNISYS ES2600, ES3020 models

  • 1800mAh capacity powers compatible DELL PowerEdge servers longer
  • 7V Li-ion chemistry delivers stable voltage for RAID controllers
  • 70 x 37.55 x 10.50mm form factor fits listed chassis precisely
  • CE RoHS ISO9001 certified for safety and quality assurance
  • Replaces DELL part numbers 13JPJ 1K178 1K240 7F134 C0887 Y0229

Replacement Battery for PowerEdge Servers

This 1800mAh lithium-ion cell operates at 3.7V and delivers 6.66Wh of capacity. It is built to fit DELL PowerEdge 1650, 1750, 2600, 2650 and 4600 systems as well as compatible UNISYS models. The pack measures 50.70 by 37.55 by 10.50mm and carries ISO9001, RoHS and CE certification.

Who Should Buy This and Who Should Not

Technicians maintaining legacy DELL PowerEdge or UNISYS AQUANTA servers will find a direct match for part numbers such as 13JPJ, 1K178, 1K240, 7F134, C0887, FDL00-150137-0, LI103450E and Y0229. Buyers needing a battery for newer rack platforms, consumer laptops or handheld PDAs should look elsewhere because the connector and form factor are specific to these older enterprise chassis.

Check Compatibility Before Ordering

Verify the exact server model and the original battery part number printed on the existing pack against the supported list above. Confirm that the physical dimensions of 50.70 x 37.55 x 10.50mm suit the battery bay and that the 3.7V rating matches the system requirement. Ensure the replacement is handled in line with lithium-ion safety guidelines.

Highlights

  • 1800mAh capacity powers compatible DELL PowerEdge servers longer
  • 7V Li-ion chemistry delivers stable voltage for RAID controllers
  • 70 x 37.55 x 10.50mm form factor fits listed chassis precisely
  • CE RoHS ISO9001 certified for safety and quality assurance
  • Replaces DELL part numbers 13JPJ 1K178 1K240 7F134 C0887 Y0229

Specifications

BrandVINTRONS

Questions about this item

Which Dell PowerEdge servers and part numbers does this 1800mAh 3.7V Li-ion battery replace?

It fits PowerEdge 1650, 1750 RAID MSI CARD, 2600, 2650, PE1650, PE2600, PE2650, PERC3/Di and Unisys Aquanta ES2600, ES3020, replacing Dell 13JPJ, 1K178, 1K240, 7F134, C0887, FDL00-150137-0, LI103450E and Y0229.

Can this battery be used with older PowerEdge 2600 or 2650 systems that still run original RAID controllers?

Yes, the compatible list includes PowerEdge 2600, 2650 and the PERC3/Di controller, so it works alongside those legacy components.

How can I verify the replacement is operating correctly once installed?

The server should boot without a CMOS checksum error, retain BIOS settings and system time after power cycles, and show no low-battery alert in the management console.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.